Airtac SE32 Standard Cylinder SE32X295
The AirTAC Airtac SE32 Standard Cylinder SE32X295 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 295mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke295 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X295
The AirTAC SE32X295 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 295 mm stroke. In its smallest standard bore size of 32 mm, it generates 402 N of push force and 345 N of pull force at 0.5 MPa, peaking at a maximum 82 kgf at 1.0 MPa. The extruded aluminum square barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
Because this specific SKU lacks the built-in -S magnet, it operates without electronic or reed position sensing. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening impacts when the 12 mm rod extends or retracts at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X295 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X295 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 295 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X295
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×295 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X295 Is Used
PCB Drill Bit Changer
Actuates the loading tray on a CNC printed circuit board drilling machine, using its 295 mm stroke to shuttle carbide bits into the spindle without overwhelming the delicate 402 N thrust limit.
Small Parts Diverter Gate
Pivots a deflector plate on a packaging conveyor to sort small plastic housings, relying on the compact tie-rod-free profile to fit within the tight 32 mm bore envelope.
Lab Reagent Dispenser
Drives a 295 mm stroke volumetric pump for chemical reagents, where the field-adjustable cushioning precisely halts the rod at speed to prevent glass component breakage.
Is the Airtac SE32 Standard Cylinder SE32X295 the Right Cylinder?
When sizing this 32 mm bore, you can step down to a smaller actuator if space is tight, though the SE32 is the smallest available ISO 15552 option in this series. If your application requires more thrust, moving up to the 40 mm bore increases the 0.5 MPa push force to 628 N. As a dimensionally interchangeable ISO 15552 component, this cylinder serves as a direct drop-in replacement for other 32 mm profile cylinders, utilizing the standard PT1/8 port and M10x1.25 rod thread.
With a 295 mm stroke, the unsupported piston rod is highly susceptible to side-load bending and premature guide-bearing wear. An external linear guide should be installed to prevent rod deflection. Note that the adjustable air cushion only decelerates the piston near the stroke ends; it does not lock or hold the load. If the system loses air pressure, the cylinder will drift, requiring a pilot-operated check valve or a BSE rod-lock variant for true static holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X295 FAQ
At 0.5 MPa, the SE32X295 provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
This specific SE32X295 SKU is manufactured without a built-in piston magnet, meaning it cannot support AirTAC CMSE reed or DMSE electronic sensors. If position detection is required, you must select the SE32X295-S variant with the magnet option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X295
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.