Airtac SE32 Standard Cylinder SE32X30H
The AirTAC Airtac SE32 Standard Cylinder SE32X30H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke30 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X30H
The AirTAC SE32X30H is a double-acting single-rod ISO 15552 profile cylinder engineered for high-temperature pneumatics. It delivers 402 N of push force at 0.5 MPa alongside a 345 N pull, making it well-suited for compact actuation. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in tight machine layouts.
This 32 mm bore unit features a 30 mm stroke and a field-adjustable pneumatic cushion at both ends to soften end-stop impact. Equipped with a Viton (FKM) seal, the operating temperature range extends to 150 C. Note that this specific SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensing without modification.
Airtac SE32 Standard Cylinder SE32X30H Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X30H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X30H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X30H Is Used
Injection Mold Ejection
Handles 402 N push at 0.5 MPa to eject small plastic parts from hot mold halves, leveraging the 150 C FKM seal to survive ambient radiated heat.
Thermoforming Press
Actuates a 30 mm stroke clamp on heated plastic film webs, where the compact 32 mm profile and Viton seal resist thermal degradation.
Laboratory Oven Door
Cycles a small access hatch on a high-temp testing chamber, using the 345 N retract force and FKM elastomers to maintain integrity near heat sources.
Is the Airtac SE32 Standard Cylinder SE32X30H the Right Cylinder?
For sizing, stepping down is not an option as 32 mm is the smallest available SE bore. If you need more force, the next size up is the 40 mm bore, which provides 628 N of push at 0.5 MPa. Keep in mind that a standard SE cylinder will drift and lose its position if air pressure is lost; if your process requires a mechanical hold, consider the BSE rod-lock variant. Because this is a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, utilizing the PT1/8 port and standard mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X30H FAQ
The SE32X30H generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Yes. It is dimensionally interchangeable per ISO 15552, acting as a drop-in replacement for other standard profile cylinders. Additionally, its FKM (Viton) seal expands the operating temperature range up to 150 C, making it ideal for heated environments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X30H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.