Airtac SE32 Standard Cylinder SE32X320S
The AirTAC Airtac SE32 Standard Cylinder SE32X320S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 320mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke320 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X320S
The AirTAC SE32X320S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. Delivering 402 N of push force at 0.5 MPa, it features a square extruded aluminum barrel without external tie rods. This clean-profile design prevents debris buildup and allows flush mounting in tight spaces.
Equipped with a built-in magnet (-S), this unit supports CMSE reed and DMSE electronic position sensing for precise end-of-stroke verification. The field-adjustable air cushioning at both ends lets you fine-tune deceleration to soften hard impacts at speed, ensuring reliable operation across its 30-800 mm/s range.
Airtac SE32 Standard Cylinder SE32X320S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X320S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 320 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X320S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×320 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X320S Is Used
PCB Drill Spindle Gating
Drives the loading/unloading gate of a printed circuit board drilling machine, utilizing the 320mm stroke and 402 N push to index panels smoothly.
Bottle Sorting Diverter
Actuates a diverter arm on a packaging conveyor, using the built-in magnet to trigger DMSE sensors and route glass bottles at high speeds.
Lab Sample Dispenser
Powers a metering valve for automated chemical dispensing, where the compact tie-rod-free profile resists corrosive fumes and fits inside tight lab enclosures.
Is the Airtac SE32 Standard Cylinder SE32X320S the Right Cylinder?
Delivering 402 N push at 0.5 MPa, this 32mm bore is the smallest standard ISO 15552 size. If your application requires less force, no smaller standard SE bore exists, but stepping up to the 40mm bore yields 628 N push for heavier loads. Because this 320mm stroke exceeds 300mm, the 12mm rod and bearing are subject to bending under side loads; an external guide is recommended to prevent premature wear.
This plain SE cylinder does not hold its load when air is exhausted or the valve is centered, as the piston will drift. For position-holding requirements, consider the BSE rod lock variant. To replace an existing cylinder, match the 32mm bore, 320mm stroke, PT1/8 port, and mounting accessory, ensuring you utilize the integrated magnet for CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X320S FAQ
The SE32X320S generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
Yes. The SE32X320S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounts matching the 32mm bore, 320mm stroke, and PT1/8 porting. The built-in magnet works seamlessly with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X320S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.