Airtac SE32 Standard Cylinder SE32X35S
The AirTAC Airtac SE32 Standard Cylinder SE32X35S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 35mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke35 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X35S
The AirTAC SE32X35S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation, delivering a 402 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames to save valuable space.
Equipped with a built-in magnet (S option), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors along its three integrated lateral grooves. The field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, preventing hard mechanical impacts even during rapid 30-800 mm/s cycling.
Airtac SE32 Standard Cylinder SE32X35S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X35S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X35S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X35S Is Used
PCB Depaneling Router
Provides the precise 402 N clamping thrust required to secure circuit boards during high-speed routing operations without flexing the substrate.
Small Carton Flap Folder
Utilizes its short 35 mm stroke to rapidly tuck and fold corrugated box flaps on compact packaging lines operating at high cycle rates.
Lab Sample Ejector
Leverages the smooth profile body and DMSE electronic sensor feedback to eject vials from testing carousels cleanly without catching on external hardware.
Is the Airtac SE32 Standard Cylinder SE32X35S the Right Cylinder?
Select this 32 mm bore when an application demands exactly 402 N of push at 0.5 MPa within a tight footprint. If your payload is lighter and you need a smaller envelope, stepping down is not an option as 32 mm is the smallest ISO 15552 size in this series; conversely, if you need substantially more force, the 40 mm bore provides a 628 N push. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or the valve centers—do not rely on it to hold vertical loads without adding a BSE rod lock or external pilot check valve. For drop-in retrofits, verify the 35 mm stroke, PT1/8 port, and your required mounting accessory before ordering.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X35S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X35S is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, provided you match the 32 mm bore, 35 mm stroke, PT1/8 port, and mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.