Airtac SE32 Standard Cylinder SE32X360S
The AirTAC Airtac SE32 Standard Cylinder SE32X360S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 360mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke360 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X360S
The AirTAC SE32X360S is a double-acting, single-rod profile cylinder built to ISO 15552 dimensional standards, delivering a 402 N push at 0.5 MPa. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting environmental corrosion.
Equipped with a built-in magnet (-S), this unit seamlessly interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening impacts during high-speed operations.
Airtac SE32 Standard Cylinder SE32X360S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X360S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X360S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X360S Is Used
PCB Drill Bit Changer
Cycles tool cassettes in CNC routing cells, using the 360 mm stroke to reach secondary tool racks while the 402 N push securely seats the tool holder.
Bottle Sorting Diverter
Pushes lightweight PET containers between high-speed packaging lanes, relying on the compact tie-rod-free barrel to fit within tight conveyor frame clearances.
Lab Sample Indexing
Advances microtiter plates into analytical instruments, using the integrated magnet and DMSE electronic sensors to confirm precise 360 mm carriage positioning.
Is the Airtac SE32 Standard Cylinder SE32X360S the Right Cylinder?
Delivering 402 N of push force at 0.5 MPa, this 32 mm bore is the smallest standard ISO 15552 size available. If your application requires less force, there is no smaller standard SE bore, but stepping up to the 40 mm bore increases output to 628 N. The 360 mm stroke provides ample extension for reaching across wider machine envelopes. Because the stroke is 360 mm, the 12 mm piston rod experiences higher bending moments under side loads; always use an external guide rail to prevent premature rod-bearing wear. As a dimensionally interchangeable ISO 15552 cylinder, it drops directly into existing foot, flange, or trunnion mounts using the standard PT1/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X360S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
No, the SE32X360S is a standard double-acting cylinder and will drift if air is exhausted or the valve is centered. The adjustable air cushions at both ends only decelerate the piston near the stroke endpoints; they do not function as a locking mechanism. For load-holding requirements, consider the BSE rod-lock variant or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X360S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.