Airtac SE32 Standard Cylinder SE32X375
The AirTAC Airtac SE32 Standard Cylinder SE32X375 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke375 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X375
The AirTAC SE32X375 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact, mid-stroke actuation. Operating at 0.15-1.0 MPa, it generates 402 N of push force and 345 N of pull force at 0.5 MPa, making it well-suited for lighter industrial handling tasks.
Its square extruded aluminum barrel eliminates external tie rods, yielding a flush body that resists corrosion and simplifies bracket mounting. The field-adjustable air cushioning at both ends can be dialed in to soften end-of-stroke impacts, and because this specific SKU lacks the -S magnet, it is ready for basic mechanical duty without position sensing.
Airtac SE32 Standard Cylinder SE32X375 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X375 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X375
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X375 Is Used
PCB Depaneling Router
Drives the linear cutting head on automated PCB depaneling routers, where the 402 N push force at 0.5 MPa smoothly separates routed circuit boards without stressing the substrate.
Bottle Divert Arm
Actuates a lightweight diverter arm on a packaging conveyor belt, utilizing the 375 mm stroke to shift small plastic bottles between parallel processing lanes.
Lab Sample Dispenser
Indexes a multi-port rotary valve in automated laboratory sample dispensers, relying on the smooth adjustable air cushion to prevent fluid splashing at the end of the 375 mm traverse.
Is the Airtac SE32 Standard Cylinder SE32X375 the Right Cylinder?
If your application requires less force, stepping down is not an option as 32 mm is the smallest standard SE bore, but stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa for heavier loads. Conversely, if you need to hold a load statically without live air pressure, note that a standard SE cylinder will drift upon exhaust; you should specify a BSE rod-lock variant or an external pilot-operated check valve.
For a drop-in retrofit, match the 32 mm bore, 375 mm stroke, PT1/8 port, and your required mounting accessory (like LB foot or FA front flange). Because this 375 mm stroke is relatively long for the 32 mm bore, the 12 mm rod and its bearing face increased bending moments under side loads; always use an external guide rail to prevent premature seal wear and rod scoring.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X375 FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, and the maximum push force is 82 kgf (approx. 804 N) at the 1.0 MPa operating limit. The standard speed range is 30-800 mm/s.
Yes, the SE32X375 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. Its standardized mounting interface and PT1/8 port allow it to serve as a drop-in replacement for other ISO 15552 profile cylinders, sharing the same mounting hardware and center distances.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X375
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.