Airtac SE32 Standard Cylinder SE32X40S
The AirTAC Airtac SE32 Standard Cylinder SE32X40S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 40mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke40 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X40S
The AirTAC SE32X40S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. Delivering 402 N of push force at 0.5 MPa, it features a square extruded aluminum barrel without external tie rods. This clean profile prevents debris buildup and allows flush mounting on space-constrained machinery.
Equipped with a built-in magnet (-S), this unit is fully compatible with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends uses a needle screw to tune deceleration, softening hard mechanical impacts at the 27 mm cushion length. It operates reliably at speeds between 30 and 800 mm/s.
Airtac SE32 Standard Cylinder SE32X40S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X40S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X40S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X40S Is Used
PCB Depaneling Gate
Actuates a small routing gate on an electronics depaneling machine, utilizing the 40mm stroke and 402 N push force to separate printed circuit boards with precise, short-stroke movements.
Carton Flap Folder
Folds minor corrugated carton flaps on a packaging line, where the compact 32mm profile and built-in DMSE sensor confirmation ensure high-speed, jam-free carton sealing.
Lab Dispenser Stop
Positions a mechanical stop for a fluid dispensing head in analytical lab equipment, relying on the adjustable end cushions to prevent liquid splashing from sudden stops.
Is the Airtac SE32 Standard Cylinder SE32X40S the Right Cylinder?
If your assembly requires slightly less force, stepping down to the 32mm bore is your baseline; the next available size up is the 40mm cylinder, which raises push force to 628 N at 0.5 MPa. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or the valve centers—use a BSE rod lock variant if your application requires fail-safe load holding.
For retrofitting, this model maps to a 32mm bore, 40mm stroke, PT1/8 port, and basic mounting interface. The included -S magnet enables drop-in sensor integration without hardware changes.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X40S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf when operated at the maximum rated pressure of 1.0 MPa.
Yes, the SE32X40S is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the 32mm bore, 40mm stroke, and PT1/8 port size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.