Airtac SE32 Standard Cylinder SE32X435
The AirTAC Airtac SE32 Standard Cylinder SE32X435 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 435mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke435 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X435
The AirTAC SE32X435 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 435 mm stroke. Delivering 402 N of push force at 0.5 MPa, it is built on an extruded aluminum barrel that omits external tie rods for a compact, corrosion-resistant footprint that mounts flush in tight machine cells. This specific 435 mm stroke is a non-standard, made-to-order length exceeding the 32 mm bore's 1000 mm standard maximum, tailored for specialized routing.
The body features sensor grooves on three sides, though this SKU is configured without a magnet, meaning it lacks native position sensing out of the box. To manage kinetic energy at the extended 435 mm travel, field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops to protect the 12 mm rod and internal seals.
Airtac SE32 Standard Cylinder SE32X435 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X435 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 435 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X435
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×435 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X435 Is Used
PCB Router Gantry
Drives a light-load Z-axis routing head across 435 mm of travel in an electronics prototyping machine, utilizing the 402 N push force to maintain tool contact.
Small-Part Diverter
Actuates a 435 mm routing flap on a packaging conveyor, using the compact tie-rod-free profile to fit flush within narrow transfer guarding.
Lab Sample Transport
Moves lightweight fluid sample trays between testing stations, relying on the tuned adjustable air cushions to prevent sudden stops from spilling liquids.
Is the Airtac SE32 Standard Cylinder SE32X435 the Right Cylinder?
Selecting the SE32X435 is appropriate when a long, precise 435 mm travel is required within a compact 32 mm bore footprint, yielding 402 N push and 345 N pull at 0.5 MPa. If your application requires less force and a smaller body, the standard ISO 15552 family does not offer a smaller bore. If you need substantially more thrust, stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. Because this is a 435 mm stroke on a 12 mm rod, the unsupported piston length invites rod-bearing bending under side loads; an external guide rail should be implemented to prevent premature seal wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 profile cylinders, matching standard mounting accessories and port sizes (PT1/8). Note that a plain SE cylinder does not hold its load when air pressure is lost or the valve is centered; the piston will drift. For position-holding requirements, integrate an external pilot-operated check valve or explore the BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X435 FAQ
The 32 mm bore generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
This specific SKU is configured without the built-in magnet (-S), so it cannot support AirTAC CMSE reed or DMSE electronic sensors. If position feedback is required, you must select an SE32 variant with the S option code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X435
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.