Airtac SE32 Standard Cylinder SE32X50SFA
The AirTAC Airtac SE32 Standard Cylinder SE32X50SFA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X50SFA
The AirTAC SE32X50SFA is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. Delivering 402 N of push force at 0.5 MPa, it provides reliable linear motion in tight assembly spaces. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush against machine frames.
This 32 mm bore unit includes a built-in magnet for CMSE and DMSE position sensing, plus a front flange (FA) accessory for rigid front-end mounting. The field-adjustable air cushioning at both stroke ends allows technicians to tune deceleration via a set screw, softening hard mechanical impacts during high-speed 30-800 mm/s cycling.
Airtac SE32 Standard Cylinder SE32X50SFA Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X50SFA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X50SFA
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X50SFA Is Used
Flow Wrapper End-Sealing
Drives the sealing jaw mechanism on continuous flow wrappers, utilizing the 402 N push force and 50 mm stroke to cleanly crimp packaging film at cycling speeds up to 800 mm/s.
PCB Drill Spindle Gating
Actuates the safety gate on small printed circuit board drilling spindles, where the front flange mount ensures rigid alignment and the CMSE sensor confirms gate closure.
Lab Dispenser Clamping
Secures small vials in automated liquid handling stations, using the smooth tie-rod-less extruded barrel to prevent snagging on adjacent wiring and tubing.
Is the Airtac SE32 Standard Cylinder SE32X50SFA the Right Cylinder?
Stepping down to the 25 mm bore is not an option in the SE range, making this 32 mm bore the smallest standard size with its 402 N push at 0.5 MPa. If your application requires greater thrust, the next size up is the 40 mm bore, which provides 628 N of push force at 0.5 MPa. Remember that this plain double-acting cylinder relies on live air pressure to hold a load; if air is lost or the valve centers, the piston will drift. For position holding without continuous pressure, consider the BSE rod lock variant. This SE32X50SFA configuration features a PT1/8 port, an FA front flange mount, and a sensor magnet for drop-in ISO 15552 dimensional interchangeability.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X50SFA FAQ
This 32 mm bore cylinder delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It features a PT1/8 port thread and a 12 mm rod with an M10x1.25 thread.
Yes, the SE32X50SFA is dimensionally interchangeable per ISO 15552 standards. It shares the standardized mounting footprint and front flange interface, allowing a direct drop-in replacement for other ISO 15552 profile cylinders without altering your machine geometry.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X50SFA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.