Airtac SE32 Standard Cylinder SE32X50SLB
The AirTAC Airtac SE32 Standard Cylinder SE32X50SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X50SLB
The AirTAC SE32X50SLB is a double-acting single-rod ISO 15552 profile cylinder with a 32mm bore and 50mm stroke. Delivering 402N of push force at 0.5MPa, it is built for compact actuation tasks. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly against machine frames.
This unit includes a built-in magnet for CMSE and DMSE position sensing, paired with an LB foot mounting bracket. Field-adjustable pneumatic cushioning at both stroke ends allows you to tune end-of-travel deceleration, preventing hard mechanical impacts during high-speed cycling.
Airtac SE32 Standard Cylinder SE32X50SLB Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X50SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X50SLB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X50SLB Is Used
PCB Depaneling Router
Provides the precise 402N push and 50mm travel needed to separate routed printed circuit boards without stressing adjacent components.
Pouch Top Sealing
Actuates a compact sealing jaw with accurate 50mm strokes, applying consistent clamping pressure for secure retail packaging.
Lab Sample Dispensing
Drives a 50mm metering stroke for precise fluid dispensing in automated laboratory analyzers, utilizing the LB foot mount for rigid frame attachment.
Is the Airtac SE32 Standard Cylinder SE32X50SLB the Right Cylinder?
Stepping down is not an option as 32mm is the smallest standard SE bore. If your application requires more thrust, the next size up is the 40mm bore, which provides 628N of push force at 0.5MPa. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not lock the load. If air pressure is lost, the rod will drift, so use a BSE rod lock for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X50SLB FAQ
This 32mm bore cylinder delivers 402N push and 345N pull at 0.5MPa, 563N push at 0.7MPa, and a maximum push of 82kgf at 1.0MPa. It features a PT1/8 port and a 12mm rod with an M10x1.25 thread.
Yes, the SE32X50SLB is dimensionally interchangeable per ISO 15552 standards. You can drop it directly into existing ISO 15552 mounting footprints and utilize the standard LB foot bracket without modifying the machine framework.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X50SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.