Airtac SE32 Standard Cylinder SE32X560
The AirTAC Airtac SE32 Standard Cylinder SE32X560 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 560mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke560 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X560
The AirTAC SE32X560 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 32mm bore and a 560mm stroke. Because this stroke exceeds the 1000mm standard maximum for this bore, it is produced as a non-standard, made-to-order unit. It generates 402N of push force and 345N of pull force at 0.5 MPa.
The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while integrating sensor grooves on three sides. Although this specific SKU lacks the -S magnet option for position sensing, the cylinder retains field-adjustable air cushioning at both ends to precisely tune end-of-stroke deceleration.
Airtac SE32 Standard Cylinder SE32X560 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X560 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 560 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X560
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×560 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X560 Is Used
Printed Circuit Board Handling
Drives precision lifting and routing arms in PCB assembly lines, where the 402N push force at 0.5 MPa is sufficient to maneuver light electronic panels across the 560mm travel distance.
Lab Sample Dispensing
Actuates sliding rack mechanisms in automated laboratory diagnostic equipment, benefiting from the compact tie-rod-free profile to fit within tight scientific instrument enclosures.
Small Parts Ejection
Pushes lightweight plastic moulded components out of machining centres, utilizing the field-adjustable air cushioning to soften end-stops and prevent part damage during ejection.
Is the Airtac SE32 Standard Cylinder SE32X560 the Right Cylinder?
Stepping down to a 25mm bore is not an ISO 15552 standard option, so the SE32X560 is effectively the smallest footprint in this series; if your application needs more power, the next size up is the 40mm bore, which provides 628N of push at 0.5 MPa. Remember that a standard SE cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered—use a BSE rod lock for secure positioning.
At 560mm, this stroke requires careful attention to the 12mm rod and M10x1.25 thread: long unsupported strokes invite rod-bearing bending under side loads, so an external guide is strongly recommended to prevent premature wear. As a true ISO 15552 dimensionally interchangeable cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, sharing standard mounting accessories and utilizing a PT1/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X560 FAQ
The SE32X560 provides 402N push and 345N pull force at 0.5 MPa, 563N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The operating speed range for this 32mm bore cylinder is 30-800 mm/s.
Yes, the SE32X560 is dimensionally interchangeable per ISO 15552 standards, meaning it functions as a drop-in replacement for other ISO 15552 profile cylinders and shares standardized mounting hardware. Note that this specific SKU lacks a -S magnet, so it cannot support CMSE or DMSE position sensors without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X560
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.