Airtac SE32 Standard Cylinder SE32X57
The AirTAC Airtac SE32 Standard Cylinder SE32X57 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 57mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke57 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X57
The AirTAC SE32X57 is a double-acting single-rod ISO 15552 profile cylinder with a 32mm bore and a 57mm stroke. It delivers 402N of push force at 0.5 MPa, making it well-suited for compact, lower-force routing and positioning tasks.
Because this SKU lacks the -S magnet code, it does not support AirTAC CMSE or DMSE position sensing out of the box. The extruded aluminum barrel omits external tie rods, yielding a clean, flush-mounting profile that resists corrosion and simplifies bracket installation. Field-adjustable pneumatic cushioning at both ends lets you fine-tune end-of-stroke deceleration to protect tooling.
Airtac SE32 Standard Cylinder SE32X57 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X57 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 57 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X57
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×57 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X57 Is Used
PCB Depaneling Router
Provides the 402N push force required to actuate the cutting head and tooling on an automated PCB depaneling router with precise 57mm travel.
Carton Flap Folder
Drives the mechanical linkage on a small-format carton sealing machine, using the adjustable cushion to soften the 57mm stroke end stops at high speed.
Lab Dispensing Valve
Actuates a pneumatic dosing valve for micro-fluidic adhesives, where the compact tie-rod-free profile keeps the workstation footprint minimal.
Is the Airtac SE32 Standard Cylinder SE32X57 the Right Cylinder?
At 0.5 MPa, this 32mm bore generates 402N of push force. If your application requires less force, stepping down is not an option as 32mm is the smallest standard SE bore. If you need more power, stepping up to the 40mm bore yields 628N of push at 0.5 MPa. As a standard ISO 15552 cylinder, it serves as a dimensionally interchangeable drop-in replacement for competing ISO 15552 profile cylinders, utilizing a PT1/8 port and standard mounting accessories. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X57 FAQ
At 0.5 MPa, the SE32X57 delivers 402N of push (extend) force and 345N of pull (retract) force. At 0.7 MPa, the push force increases to 563N, with a maximum push force of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X57 is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the 32mm bore, 57mm stroke, PT1/8 port, and standard mounting footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X57
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.