Airtac SE32 Standard Cylinder SE32X57S
The AirTAC Airtac SE32 Standard Cylinder SE32X57S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 57mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke57 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X57S
The AirTAC SE32X57S is a double-acting, single-rod ISO 15552 profile cylinder with a 32 mm bore and a 57 mm stroke. It generates 402 N of push force at 0.5 MPa and features a PT1/8 port paired with a 12 mm hard-chrome plated rod. Because the stroke deviates from the standard list, this specific 57 mm travel length is produced as a made-to-order configuration.
The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. Equipped with a built-in magnet (S option), the piston is ready for CMSE reed and DMSE electronic position sensing. The field-adjustable pneumatic cushioning at both ends lets you dial in end-of-stroke deceleration to absorb kinetic energy smoothly.
Airtac SE32 Standard Cylinder SE32X57S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X57S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 57 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X57S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×57 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X57S Is Used
PCB Depaneling Router
Drives a low-resistance linear guide to singulate printed circuit boards, utilizing the 402 N push force and 57 mm stroke to cleanly separate panels without stressing components.
Lab Sample Dispenser
Actuates a micro-pipette head for fluid dispensing, where the 57 mm travel provides precise top-bottom positioning and the -S magnet triggers DMSE electronic sensors for volumetric accuracy.
Small Part Press Fit
Inserts dowel pins into electronic enclosures, using the 345 N pull force to retract the tooling reliably while the compact profile barrel saves valuable space in tight machine cells.
Is the Airtac SE32 Standard Cylinder SE32X57S the Right Cylinder?
If you need slightly less thrust, stepping down to the 32 mm bore is not an option, but moving up to the 40 mm bore yields 628 N of push at 0.5 MPa for heavier loads. Conversely, if 402 N is excessive, you must look at smaller non-ISO alternatives. This SE32X57S is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other ISO 15552 32 mm bore, 57 mm stroke cylinders using standard mounting hardware and PT1/8 ports. Remember that a plain double-acting cylinder drifts when air is lost; if your application must hold a load without live pressure, consider an AirTAC BSE rod lock instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X57S FAQ
The SE32X57S generates 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end and does not lock or hold the load. If the valve is centered or air is lost, the piston will drift. For position holding, you need an external rod lock or the AirTAC BSE variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X57S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.