Airtac SE32 Standard Cylinder SE32X5S
The AirTAC Airtac SE32 Standard Cylinder SE32X5S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 5mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke5 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X5S
The AirTAC SE32X5S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact, high-speed motion tasks. Delivering 402 N of push force at 0.5 MPa, it utilizes a square extruded aluminum barrel that omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush in tight machine envelopes. The integrated -S magnet enables seamless position detection with CMSE reed or DMSE electronic sensors.
Field-adjustable air cushioning at both ends allows precise tuning of end-of-stroke deceleration, preventing hard mechanical impacts even at cycling speeds up to 800 mm/s. Operating via a PT1/8 port and a 12 mm hard-chrome rod, this unit provides true ISO 15552 dimensional interchangeability, making it a direct drop-in replacement for other standard profile cylinders without altering mounting hardware.
Airtac SE32 Standard Cylinder SE32X5S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X5S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X5S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X5S Is Used
PCB Pick-and-Place
Utilizes the 5 mm stroke and 402 N thrust to rapidly pick delicate electronic components without over-traveling or crushing the substrate.
Pneumatic Ejector
Short-throw ejection of small molded plastic parts from machining fixtures, relying on the integrated magnet for precise end-position confirmation.
Micro-Clamp Actuation
Secures lightweight laboratory samples or small workpieces in test jigs, where the compact 32 mm profile and adjustable cushioning prevent impact damage.
Is the Airtac SE32 Standard Cylinder SE32X5S the Right Cylinder?
Delivering 402 N push at 0.5 MPa, this 32 mm bore is the smallest in the SE lineup, making it ideal for light-duty positioning. If your assembly requires slightly more thrust, stepping up to the 40 mm bore yields 628 N push at 0.5 MPa. Because the 5 mm stroke is extremely short, side-load bending on the 12 mm rod bearing is minimal, though external guides are still recommended for offset loads. As a double-acting cylinder, it relies on continuous air pressure to hold position; if unpowered, the piston drifts, so a BSE rod lock is needed for strict position holding. For ISO 15552 retrofits, ensure your hardware matches the basic mounting interface, PT1/8 port, and -S magnet requirement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X5S FAQ
At 0.5 MPa, the SE32X5S provides 402 N push and 345 N pull force. At 0.7 MPa, the push force is 563 N. The maximum allowable push force is 82 kgf at 1.0 MPa.
Yes. The SE32X5S is dimensionally interchangeable per ISO 15552, meaning it shares the standard mounting footprint, port sizes, and body dimensions of other ISO 15552 profile cylinders, allowing for direct drop-in replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X5S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.