Airtac SE32 Standard Cylinder SE32X600S
The AirTAC Airtac SE32 Standard Cylinder SE32X600S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke600 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X600S
The AirTAC SE32X600S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers a 402 N push at 0.5 MPa alongside a 345 N pull, making it well-suited for lighter duty cycling across its 600 mm travel. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine envelopes.
This specific unit includes a built-in magnet (-S) for direct switching with AirTAC CMSE reed or DMSE electronic sensors. To manage kinetic energy at the end of a long stroke, field-adjustable air cushions at both ends allow technicians to dial in deceleration and soften hard mechanical stops without adding external shock absorbers.
Airtac SE32 Standard Cylinder SE32X600S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X600S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X600S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X600S Is Used
Packaging Line Diverter
Uses the 600 mm stroke to push cartons between parallel packaging lanes, relying on the 402 N push force to overcome friction without damaging the boxes.
Lab Sample Tray Shuttle
Moves lightweight analytical trays across testing stations where the compact 32 mm bore fits within tight instrument cavities and the -S magnet confirms end-of-travel positioning.
PCB Handling Gate
Actuates a routing gate on a electronics assembly line, utilizing the no-tie-rod extruded profile to mount flush against the machine frame without snagging wiring.
Is the Airtac SE32 Standard Cylinder SE32X600S the Right Cylinder?
Choosing this 32 mm bore makes sense when your load requires the 402 N push at 0.5 MPa that this profile cylinder provides. If your application demands less energy, you would step down to a 25 mm bore (if available in your series) or a different compact frame; conversely, moving up to the 40 mm bore increases the push to 628 N at 0.5 MPa. Because this unit features a 600 mm stroke, the 12 mm rod and internal bearing face increased bending moments under side loading—an external guide rail is strongly recommended to prevent premature seal wear.
As a standard ISO 15552 component, the SE32X600S provides a drop-in replacement footprint for other ISO 15552 cylinders, sharing standardized mounting hardware like LB foot brackets or FA front flanges. It uses a PT1/8 port and includes the -S magnet for position sensing. Note that the adjustable cushion only decelerates the piston near stroke end; it does not lock or hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X600S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides a 402 N push and a 345 N pull. At 0.7 MPa, the push force is 563 N, and the maximum push is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the adjustable air cushions at both ends only serve to decelerate the piston near the end of the stroke; they are not brakes. If your application requires position holding without live air pressure, you must use an external rod lock like the BSE series or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.