Airtac SE32 Standard Cylinder SE32X64S
The AirTAC Airtac SE32 Standard Cylinder SE32X64S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 64mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke64 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X64S
The AirTAC SE32X64S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatic tasks. It delivers 402 N of push force at 0.5 MPa and utilizes a PT1/8 port. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine envelopes.
Fitted with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensing. Field-adjustable air cushioning at both ends allows you to tune end-stop deceleration for the 64 mm stroke, ensuring smooth stops rather than harsh impacts.
Airtac SE32 Standard Cylinder SE32X64S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X64S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 64 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X64S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×64 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X64S Is Used
PCB Depaneling Saw
Provides the 402 N push needed to drive the linear blade on an automated PCB depaneling router across 64 mm strokes.
Lab Sample Dispenser
Actuates a multi-port valve block in diagnostic analyzers, using the integrated magnet to trigger DMSE electronic sensors for precise dosing.
Small Part Ejector
Pushes lightweight aluminum stampings out of a progressive die, relying on the adjustable cushion to prevent mark-off on soft parts.
Is the Airtac SE32 Standard Cylinder SE32X64S the Right Cylinder?
At 402 N push (0.5 MPa), this 32 mm bore fits light-duty positioning perfectly. If you require less force, there is no smaller standard ISO 15552 bore in this series. If your load demands more power, step up to the 40 mm bore, which provides 628 N of push at 0.5 MPa. Remember that a standard SE cylinder relies on live air pressure to hold its position; if air is lost, the piston drifts. For safety holding without pressure, consider a BSE rod lock variant. To retrofit, match the 32 mm bore, 64 mm stroke, PT1/8 port, and your preferred mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X64S FAQ
The 32 mm bore generates 402 N push and 345 N pull at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa operating pressure.
Yes, the SE32X64S is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 cylinders, retaining the original mounting hardware and PT1/8 port connections.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X64S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.