Airtac SE32 Standard Cylinder SE32X650
The AirTAC Airtac SE32 Standard Cylinder SE32X650 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke650 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X650
The AirTAC SE32X650 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 32 mm bore and a 650 mm stroke. It belongs to the standard SE series, utilizing a square extruded aluminum barrel that completely eliminates external tie rods. This design not only resists corrosion but allows for flush mounting and easy integration of AirTAC CMSE or DMSE position sensors directly into the three-sided sensor grooves. This specific SKU is supplied without a built-in magnet.
In terms of performance, this compact actuator generates 402 N of push force and 345 N of pull force at 0.5 MPa, reaching a maximum push of 82 kgf at 1.0 MPa. The unit features field-adjustable pneumatic cushioning at both ends, enabling technicians to fine-tune end-of-stroke deceleration via a set screw rather than relying on a fixed rubber bumper. Operating at speeds from 30-800 mm/s, it uses a PT1/8 port and a Ø12 mm hard-chrome plated rod with an M10x1.25 thread.
Airtac SE32 Standard Cylinder SE32X650 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X650 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X650
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X650 Is Used
CNC Lathe Door Automation
Handles the automated opening and closing of heavy CNC lathe safety doors, utilizing the 650 mm stroke to clear the work area while providing 402 N of push at 0.5 MPa to overcome door resistance.
Packaging Line Diverter
Actuates a pneumatic diverter arm on a high-speed packaging conveyor, where the adjustable end cushions absorb the kinetic energy of the 32 mm bore piston moving at up to 800 mm/s to prevent hard impacts.
Lab Sample Transport
Moves sample racks between testing stations in analytical laboratory equipment, where the smooth extruded profile barrel allows for flush mounting in tight enclosures and the 82 kgf max push easily shifts the lightweight carriers.
Is the Airtac SE32 Standard Cylinder SE32X650 the Right Cylinder?
When sizing this actuator, consider stepping up to the 40 mm bore if your application requires greater thrust, as the neighbor SE40 provides 628 N of push at 0.5 MPa compared to this model's 402 N. Conversely, the 32 mm bore is the smallest available in the SE range, so if you need to reduce physical size and can accept lower force, you would need to look outside the ISO 15552 standard to smaller series like the SMI. Because this is a standard double-acting cylinder, it will not hold a load or maintain its position if air pressure is lost or the control valve is centered; the piston will drift. For position-holding safety, consider the BSE rod-lock variant. At a 650 mm stroke, the unsupported Ø12 mm rod is subject to bending under lateral loads, so utilizing an external guide rail is strongly recommended to prevent premature seal wear. This model serves as a dimensionally interchangeable drop-in replacement for any ISO 15552 cylinder, matching the exact 32 mm bore, 650 mm stroke, PT1/8 port, and standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X650 FAQ
The SE32X650 generates 402 N of push force and 345 N of pull force at 0.5 MPa, 563 N of push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, the SE32X650 is built to the ISO 15552 / VDMA 24562 standard, making it dimensionally interchangeable with other ISO 15552 profile cylinders. You can use it as a drop-in replacement using the existing mounting hardware and PT1/8 port connections.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X650
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.