Airtac SE32 Standard Cylinder SE32X65S
The AirTAC Airtac SE32 Standard Cylinder SE32X65S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 65mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke65 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X65S
The AirTAC SE32X65S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatic tasks. Operating at 0.5 MPa, it provides 402 N of push force and 345 N of pull force, making it well-suited for lower-force automation sequences. The included -S magnet enables seamless position detection with CMSE reed or DMSE electronic sensors.
Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly against machine frames. Furthermore, the field-adjustable air cushions at both ends allow technicians to fine-tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
Airtac SE32 Standard Cylinder SE32X65S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X65S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X65S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X65S Is Used
PCB Handling
Drives small pick-and-place heads for electronic board routing, utilizing the 402 N push force and 65 mm stroke for rapid, precise component transfers.
Carton Sealing
Actuates compact folding flaps on small packaging lines, where the adjustable cushioning ensures gentle end-stop contact without denting the carton.
Lab Dispensing
Moves pipette arrays in automated analytical instruments, relying on the built-in magnet for DMSE electronic sensors to verify fluid aspiration positions.
Is the Airtac SE32 Standard Cylinder SE32X65S the Right Cylinder?
With a 65 mm stroke and 402 N push at 0.5 MPa, this bore fits light-duty positioning perfectly. If your application requires less force, stepping down is not an option as 32 mm is the smallest available SE bore. If you need substantially more power, the next bore up is 40 mm, which provides 628 N of push at 0.5 MPa. Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops; for position holding without live pressure, consider a BSE rod lock variant. For ISO 15552 dimensional interchangeability, match the 32 mm bore, 65 mm stroke, PT1/8 port, and your required mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X65S FAQ
At 0.5 MPa, the 32 mm bore generates 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum push force is 82 kgf at 1.0 MPa, and the operational speed ranges from 30-800 mm/s.
Yes, the SE32X65S is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the 32 mm bore, 65 mm stroke, and PT1/8 port size without altering your existing mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X65S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.