Airtac SE32 Standard Cylinder SE32X680S
The AirTAC Airtac SE32 Standard Cylinder SE32X680S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 680mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke680 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X680S
The AirTAC SE32X680S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact linear actuation. Operating at 0.5 MPa, it delivers a push force of 402 N and a pull force of 345 N. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant housing that mounts flush against machine frames while freeing up valuable space.
Equipped with a built-in magnet (S option), this unit directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The integrated pneumatic cushioning at both ends is field-adjustable via a set screw, allowing technicians to tune deceleration and eliminate hard end-stop impacts during high-speed cycling.
Airtac SE32 Standard Cylinder SE32X680S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X680S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 680 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X680S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×680 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X680S Is Used
PCB Drill Bit Changer
Actuates a vertical tool changer mechanism for micro-drills, using the 680 mm stroke to fully extract and swap tool cassettes without collision.
Small Parts Divert Gate
Drives a routing flap on a packaging conveyor, leveraging the 402 N push force to deflect lightweight cardboard cartons into secondary lanes.
Lab Sample Transfer Arm
Moves test tube racks between analysis stations, relying on the -S magnet and DMSE electronic sensors to confirm safe sample handover positions.
Is the Airtac SE32 Standard Cylinder SE32X680S the Right Cylinder?
Selecting the SE32X680S is ideal when your application requires the specific 402 N push force at 0.5 MPa within a tight 32 mm bore envelope. If you need to step down to a smaller footprint, the neighbour bore below is unavailable, making this the most compact standard option. Conversely, if your load demands more thrust, stepping up to the 40 mm bore increases your push force to 628 N. This model uses a PT1/8 port and includes the -S magnet for position sensing.
Because this cylinder features a 680 mm stroke, the extended 12 mm rod is subject to bending forces under heavy side loads. To prevent premature rod-bearing wear, implement an external guide rail to support the load and ensure purely axial motion. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not lock the load. If air pressure is lost, the piston will drift, requiring a BSE rod lock for secure holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X680S FAQ
At 0.5 MPa, the SE32X680S provides a push force of 402 N and a pull force of 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE32X680S is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the exact mounting and PT1/8 port locations without machining modifications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X680S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.