Airtac SE32 Standard Cylinder SE32X700SN
The AirTAC Airtac SE32 Standard Cylinder SE32X700SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke700 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X700SN
The AirTAC SE32X700SN is a double-acting single-rod ISO 15552 profile cylinder engineered for compact, space-constrained actuation. Delivering 402 N of push force at 0.5 MPa, it features a square extruded aluminum barrel without external tie rods. This clean profile not only resists corrosion but allows flush mounting against machine frames, saving valuable real estate on densely packed production lines.
This 32 mm bore unit integrates an NBR seal for reliable pneumatic operation and includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic position sensors. Field-adjustable air cushions at both ends allow technicians to dial in end-of-stroke deceleration via a simple screw, softening hard impacts during high-speed cycling.
Airtac SE32 Standard Cylinder SE32X700SN Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X700SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X700SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X700SN Is Used
Package Sorter Diverter
Uses the 700 mm stroke to push small parcels laterally across a high-speed logistics belt, where the 402 N push force easily overcomes carton friction.
Lab Sample Tray Shuttle
Moves lightweight testing racks between isolated workstation zones, benefiting from the compact tie-rod-free extruded profile to fit tight analytical enclosures.
Electronic PCB Ejector
Depopulates populated circuit boards from test fixtures, relying on the adjustable end cushions to prevent impact damage to delicate solder joints during retraction.
Is the Airtac SE32 Standard Cylinder SE32X700SN the Right Cylinder?
When sizing this 32 mm bore model, note its 402 N push force at 0.5 MPa. If your application requires less power, there is no smaller standard ISO 15552 bore, but if you need more authority, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Because this is a single-rod cylinder, it does not hold a load if air pressure is lost or the valve is centered; the piston will drift. For position holding without live pressure, consider a BSE rod lock variant.
At a 700 mm stroke, the 12 mm rod and M10x1.25 thread face significant bending moments under any side load. An external guide rail is strongly recommended to prevent rod-bearing distortion and premature seal failure. This model is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 cylinders while retaining the standard PT1/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X700SN FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force increases to 563 N. The maximum push force is 82 kgf at 1.0 MPa.
No. The SE32X700SN is a double-acting cylinder with adjustable air cushions at both ends, but these cushions only decelerate the piston near the stroke end; they do not lock or hold the load. If air is exhausted, the piston will drift. For true position holding, use a BSE series rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X700SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.