Airtac SE32 Standard Cylinder SE32X75CA
The AirTAC Airtac SE32 Standard Cylinder SE32X75CA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X75CA
The AirTAC SE32X75CA is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics, delivering 402 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interface dimensions for seamless retrofitting.
This 32 mm bore unit integrates field-adjustable pneumatic cushioning at both stroke ends to decelerate the 12 mm hard-chrome rod smoothly, preventing hard end-stop impacts at operating speeds up to 30-800 mm/s. Configured with a CA single clevis mounting accessory and a PT1/8 port, it is tailored for pivoting actuation tasks. This SKU omits the -S magnet, meaning it arrives without built-in position sensing.
Airtac SE32 Standard Cylinder SE32X75CA Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X75CA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X75CA
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X75CA Is Used
Belt Conveyor Diverter Arms
Uses the CA clevis to pivot a sorting gate, leveraging the 402 N push force at 0.5 MPa to reliably deflect lightweight cardboard cartons on a packaging line.
Small-Part Ejector Mechanisms
Cycles rapidly at 30-800 mm/s to eject plastic molded parts from a press die, relying on the 27 mm adjustable air cushion to soften the 75 mm stroke ends.
Lab Sample Indexing Gates
Employs the compact tie-rod-free extruded profile to swing a pivot gate in tight lab automation cells, precisely routing vial racks between processing stations.
Is the Airtac SE32 Standard Cylinder SE32X75CA the Right Cylinder?
Selecting the SE32X75CA is optimal when your mechanism requires 402 N of push force at 0.5 MPa within a tight pivot mount footprint. If your load demands less thrust, stepping down to the 32 mm bore's closest neighbor is not an option as this is the smallest ISO 15552 size; however, if you need substantially more power, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or the valve centers; applications requiring dead-stop holding must integrate an external pilot-operated check valve or upgrade to the BSE rod lock variant. For ISO 15552 dimensional replacements, verify the 75 mm stroke, PT1/8 port, and CA clevis accessory match your existing geometry.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X75CA FAQ
The 32 mm bore generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It features a 12 mm rod with an M10x1.25 rod-end thread and a PT1/8 port.
Yes, it is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, serving as a drop-in replacement for other ISO 15552 cylinders. This specific SKU lacks the -S magnet, so it does not support AirTAC CMSE or DMSE position sensors without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X75CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.