Airtac SE32 Standard Cylinder SE32X75SFTC
The AirTAC Airtac SE32 Standard Cylinder SE32X75SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X75SFTC
The AirTAC SE32X75SFTC is a double-acting, single-rod ISO 15552 profile cylinder delivering a 402 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interfaces. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for precise end-position detection.
This 32 mm bore unit features a PT1/8 port, a 12 mm rod with an M10x1.25 thread, and field-adjustable pneumatic cushioning at both ends. The cushioning is a genuine deceleration mechanism tuned via a screw to soften hard end stops at operating speeds up to 800 mm/s. Equipped with an FTC center trunnion mount, it is built for pivot applications requiring high lateral stability.
Airtac SE32 Standard Cylinder SE32X75SFTC Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X75SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X75SFTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X75SFTC Is Used
CNC Tool Changer
Actuates a 402 N push at 0.5 MPa to release tool holders in automated machining centers, utilizing the FTC trunnion for smooth pivot motion.
Carton Flap Folder
Deploys a 75 mm stroke to fold corrugated cardboard flaps at high speed, relying on the field-adjustable cushion to soften end stops.
Lab Sample Dispenser
Drives a 12 mm rod to meter reagents into test vials, using the built-in magnet with DMSE electronic sensors for precise positioning.
Is the Airtac SE32 Standard Cylinder SE32X75SFTC the Right Cylinder?
Selecting the SE32X75SFTC is optimal when your application requires a 402 N push at 0.5 MPa within a 75 mm stroke. If you need less force, stepping down to the 40 mm bore is not an option as 32 mm is the smallest available; however, if your load demands more thrust, stepping up to the 40 mm bore provides a 628 N push at 0.5 MPa. Because this is a plain double-acting cylinder, it cannot hold a load when air is exhausted or the valve is centered—the piston will drift—so a BSE rod lock is required for secure positioning.
For ISO 15552 dimensional interchangeability, match the 32 mm bore, 75 mm stroke, PT1/8 port, and FTC mounting accessory. The -S magnet enables drop-in compatibility with AirTAC CMSE and DMSE sensors. Since the stroke is under 300 mm, side-load stress on the rod bearing is minimal, but always verify lateral loads against the bearing capacity.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X75SFTC FAQ
The 32 mm bore generates a 402 N push and 345 N pull at 0.5 MPa, a 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa.
Yes, the SE32X75SFTC is dimensionally interchangeable per ISO 15552 standards. You can drop it in to replace other ISO 15552 profile cylinders using the existing FTC mounting hardware and PT1/8 ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X75SFTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.