Airtac SE32 Standard Cylinder SE32X800S
The AirTAC Airtac SE32 Standard Cylinder SE32X800S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke800 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X800S
The AirTAC SE32X800S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a push force of 402 N at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
Equipped with a built-in magnet (S option), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration via a setscrew, softening hard impacts during rapid 30-800 mm/s cycling.
Airtac SE32 Standard Cylinder SE32X800S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X800S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X800S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X800S Is Used
Carton Pusher Diverter
Uses the 800 mm stroke to push corrugated cartons off a main packaging line onto a secondary spur, relying on the 402 N thrust to overcome box friction.
Lab Sample Tray Shuttle
Moves lightweight analytical trays between testing stations, using the built-in magnet with DMSE electronic sensors to confirm full extension.
Tote Stacking Extractor
Extracts empty storage totes from a vertical magazine, where the compact tie-rod-free profile prevents snagging in tight rack clearances.
Is the Airtac SE32 Standard Cylinder SE32X800S the Right Cylinder?
This 32 mm bore provides 402 N push at 0.5 MPa; if your application requires less force, the smaller 32 mm is the base size, while stepping up to the 40 mm bore yields 628 N of thrust. Because the 800 mm stroke is at the maximum standard limit for this bore, the 12 mm rod and front bearing face significant bending moments under side loads—an external guide rail is strongly recommended to prevent premature seal wear. As a true ISO 15552 cylinder, it serves as a drop-in replacement for any standard 32 mm bore, 800 mm stroke profile cylinder with PT1/8 ports and basic mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X800S FAQ
At 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, and the maximum push force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the SE32X800S is a standard double-acting cylinder and will drift if air is exhausted or the valve is centered. The adjustable air cushion only decelerates the piston near stroke end and does not function as a locking mechanism. For position holding, consider a BSE series rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.