Airtac SE32 Standard Cylinder SE32X80H
The AirTAC Airtac SE32 Standard Cylinder SE32X80H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X80H
The AirTAC SE32X80H is a double-acting single-rod ISO 15552 profile cylinder engineered for high-temperature pneumatics. It delivers 402 N of push force at 0.5 MPa and utilizes a square extruded aluminum barrel without external tie rods, ensuring a compact, corrosion-resistant footprint that mounts flush in tight machine cavities. This specific SKU is built with an FKM (Viton) seal, expanding the standard operating temperature range up to 150 C for harsh thermal environments.
Because this 32 mm bore unit lacks a built-in magnet (-S), it does not support direct CMSE or DMSE electronic position sensing out of the box. Instead, it relies on field-adjustable air cushioning at both ends to decelerate the piston near the stroke limits, allowing you to tune out hard end-stop impacts at operating speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X80H Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X80H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X80H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X80H Is Used
Injection Mold Ejection
Survives ambient heat near mold plates using the 150 C FKM seal, providing 402 N of push to eject small plastic parts reliably.
Shrink-Wrap Sealing
Drives a compact 80 mm stroke sealing jaw in high-temperature packaging tunnels where standard TPU seals would degrade.
Lab Oven Handling
Transfers small samples inside heated laboratory ovens, leveraging the tie-rod-free profile to fit tight insulated chambers.
Is the Airtac SE32 Standard Cylinder SE32X80H the Right Cylinder?
When sizing this 32 mm bore unit, evaluate your force margins carefully: stepping down is not an option as this is the smallest standard SE bore, but stepping up to the 40 mm bore increases your 0.5 MPa push force to 628 N if your payload demands it. Keep in mind that a standard double-acting cylinder like this relies on continuous air pressure to hold a load; if your valve centers or air supply drops, the piston will drift. For position holding without live pressure, consider a BSE rod-lock variant. To match this exact ISO 15552 footprint for a retrofit, confirm the 80 mm stroke, PT1/8 port, and basic mounting interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X80H FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push of 82 kgf at 1.0 MPa. Equipped with an FKM (Viton) seal, it operates reliably in temperatures up to 150 C.
Yes. The SE32X80H is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it serves as a drop-in replacement for other ISO 15552 profile cylinders with a 32 mm bore, 80 mm stroke, and PT1/8 porting. Note that this specific SKU lacks a sensor magnet, so it cannot directly trigger CMSE or DMSE switches without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X80H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.