Airtac SE32 Standard Cylinder SE32X80S
The AirTAC Airtac SE32 Standard Cylinder SE32X80S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X80S
The AirTAC SE32X80S is a double-acting single-rod ISO 15552 profile cylinder delivering 402 N of push force at 0.5 MPa. Designed with a 32 mm bore and an 80 mm stroke, it provides reliable linear motion for lighter-duty tasks. The square extruded aluminum barrel eliminates external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames to save valuable space.
This unit includes a built-in magnet (-S) for non-contact position sensing with CMSE reed or DMSE electronic switches. To protect the piston at end-of-stroke, it features field-adjustable pneumatic cushioning at both ends, allowing technicians to fine-tune deceleration and eliminate hard metal impacts during high-speed operations.
Airtac SE32 Standard Cylinder SE32X80S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X80S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X80S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X80S Is Used
PCB Routing Machine Gating
Actuates lightweight safety gates on a PCB depaneling router, using the 402 N push force and 80 mm stroke to secure the access panel during spindle operation.
Lab Dispenser Clamping
Provides precise linear clamping for small reagent vials in an automated diagnostic dispenser, leveraging the compact tie-rod-free profile to fit tight lab enclosures.
Carton Flap Folding
Drives a small mechanical arm to fold minor flaps on small pharmaceutical cartons, utilizing the DMSE electronic sensor to confirm the 80 mm stroke end position.
Is the Airtac SE32 Standard Cylinder SE32X80S the Right Cylinder?
Choose the SE32X80S when a 402 N (0.5 MPa) extension force is sufficient for your task. If your application requires less power, the adjacent 32 mm bore family is the smallest standard ISO 15552 size available, meaning you would step down to a non-ISO compact cylinder. For heavier demands, stepping up to a 40 mm bore provides 628 N of push force. Keep in mind that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If position holding is required without live air pressure, use a BSE rod lock variant or an external pilot-operated check valve. This 80 mm stroke is well below the 300 mm threshold, so standard rod bearing support is adequate without needing an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X80S FAQ
The SE32X80S generates 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s, features a PT1/8 port, and has a 12 mm rod with an M10x1.25 thread.
Yes, the SE32X80S is built to the ISO 15552 / VDMA 24562 standard, making it dimensionally interchangeable with other ISO 15552 profile cylinders. You can use it as a drop-in replacement using your existing mounting hardware and standardized interface dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.