Airtac SE32 Standard Cylinder SE32X80SLB
The AirTAC Airtac SE32 Standard Cylinder SE32X80SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X80SLB
The AirTAC SE32X80SLB is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation, delivering 402 N of push force at 0.5 MPa. It features a 32 mm bore, an 80 mm stroke, and a built-in magnet for position sensing. The square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine envelopes.
This LB foot-mounted variant secures rigidly to base plates, while the field-adjustable air cushioning at both ends allows technicians to dial out harsh end-of-stroke impacts at operating speeds up to 800 mm/s. The integrated magnet interfaces directly with AirTAC CMSE reed and DMSE electronic sensors along the three-sided sensor groove, ensuring reliable positional feedback.
Airtac SE32 Standard Cylinder SE32X80SLB Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X80SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X80SLB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X80SLB Is Used
PCB Drill Spindle Gating
Cycles small pneumatic gates on PCB drilling rigs, using the 402 N push force to index panels accurately without damaging the delicate substrate.
Carton Flap Folder
Folds minor flaps on small carton erecting lines, where the 80 mm stroke and LB foot mount provide stable, compact retraction in tight transfer spaces.
Lab Dispenser Actuation
Drives precision pinch valves on automated liquid dispensing stations, benefiting from the DMSE sensor feedback and smooth adjustable cushioning.
Is the Airtac SE32 Standard Cylinder SE32X80SLB the Right Cylinder?
Choosing this 32 mm bore cylinder is optimal when your application requires roughly 402 N of push force at 0.5 MPa. If your load demands less thrust, you can step down to the 25 mm bore, but if you need significantly more power, the next size up is the 40 mm bore, which provides 628 N of push at 0.5 MPa. Because this is a double-acting cylinder, it relies on continuous air pressure to move and hold the load; it will drift if air is lost or the valve centers. For stopping mid-stroke under load, a BSE rod lock is required.
This SE32X80SLB ships with an LB foot mounting bracket and a built-in S magnet for CMSE/DMSE sensors. Its PT1/8 port and M10x1.25 rod thread match standard ISO 15552 dimensions, making it a drop-in retrofit for any machine built around the standard 32 mm footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X80SLB FAQ
At 0.5 MPa, the 32 mm bore provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum rated push force is 82 kgf at 1.0 MPa.
Yes, the SE32X80SLB is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other 32 mm ISO 15552 profile cylinders, retaining the same mounting interface and PT1/8 port size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X80SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.