Airtac SE32 Standard Cylinder SE32X80SN
The AirTAC Airtac SE32 Standard Cylinder SE32X80SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X80SN
The AirTAC SE32X80SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers 402 N of push force at 0.5 MPa and operates within a 30-800 mm/s speed range. The square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine cells.
This 32 mm bore unit features a 12 mm hard-chrome rod, an M10x1.25 rod-end thread, and a PT1/8 port. Equipped with a built-in magnet for CMSE reed or DMSE electronic position sensing, it also uses an NBR seal to handle standard operating temperatures reliably. The field-adjustable air cushioning at both ends lets you fine-tune end-of-stroke deceleration to protect payloads.
Airtac SE32 Standard Cylinder SE32X80SN Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X80SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X80SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X80SN Is Used
PCB Handling
Drives small pick-and-place heads in electronics assembly, utilizing the 402 N push force and 80 mm stroke to move delicate printed circuit boards precisely.
Carton Sealing
Actuates compact flap-folding mechanisms on packaging lines, where the 32 mm bore fits neatly into tight spaces and the NBR seal withstands daily wear.
Lab Dispensing
Positions fluid dispensing valves in laboratory automation, relying on the DMSE electronic sensor feedback and the 27 mm cushion length for smooth stops.
Is the Airtac SE32 Standard Cylinder SE32X80SN the Right Cylinder?
When sizing this 32 mm bore actuator, compare its 402 N push at 0.5 MPa against your actual load. If your application requires less force, stepping down is not an option as 32 mm is the smallest standard SE bore. If you need more power, the next size up is the 40 mm bore, which provides 628 N of push at 0.5 MPa. Keep in mind that this is a standard double-acting cylinder; the adjustable air cushion only decelerates the piston near stroke end and does not hold a load. If air pressure is lost, the rod drifts, so use an external guide for side loads or a BSE rod lock for position holding. For ISO 15552 dimensional interchangeability, match the 32 mm bore, 80 mm stroke, PT1/8 port, and basic mounting footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X80SN FAQ
At 0.5 MPa, the SE32X80SN provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push capacity is 82 kgf at 1.0 MPa.
Yes, the SE32X80SN is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using the same 32 mm bore, 80 mm stroke, PT1/8 port, and basic mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X80SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.