Airtac SE32 Standard Cylinder SE32X830S
The AirTAC Airtac SE32 Standard Cylinder SE32X830S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 830mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke830 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X830S
The AirTAC SE32X830S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 32 mm bore and an 830 mm non-standard stroke. Operating at 0.5 MPa, it generates 402 N of push force and 345 N of pull force, utilizing a PT1/8 port and a 12 mm hard-chrome rod with an M10x1.25 thread. Because the 830 mm stroke exceeds the standard 1000 mm maximum for this bore, it is manufactured as a made-to-order unit.
This unit features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machine envelopes. The integrated -S magnet enables position detection with AirTAC CMSE reed or DMSE electronic sensors. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X830S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X830S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 830 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X830S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×830 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X830S Is Used
Package Sorting Diverter
Uses the 830 mm stroke to push cartons between adjacent sorting belts, relying on the 402 N thrust to redirect loads without stalling.
Long-Stroke Part Ejector
Extracts molded components from deep press dies, where the extended reach and adjustable cushioning absorb the kinetic energy of the ejection.
Lab Sample Dispenser
Moves test racks along an 830 mm path, using the built-in -S magnet with DMSE electronic sensors to confirm full extension for precise volumetric dispensing.
Is the Airtac SE32 Standard Cylinder SE32X830S the Right Cylinder?
At 0.5 MPa, this 32 mm bore yields 402 N of push force. If your application requires less thrust, stepping down to the 32 mm bore's smaller neighbor is not possible as it is the smallest size, but you can optimize pressure. Conversely, if you need more power, stepping up to the 40 mm bore provides 628 N of push at the same pressure. Keep in mind a plain SE cylinder will drift if air is lost or a valve is centered; for position holding, specify a BSE rod lock.
Because this unit has a non-standard 830 mm stroke, the 12 mm rod and rod-end bearing face significant bending moments under side loads. For an unsupported stroke of this length, you must incorporate an external guide mechanism to prevent premature seal wear and rod deformation. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing standard mounting hardware and sensor grooves.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X830S FAQ
The 32 mm bore generates 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 563 N, and the maximum push force is 82 kgf at 1.0 MPa.
Yes, the SE32X830S is dimensionally interchangeable per ISO 15552 standards, allowing it to drop into existing footprints and use shared mounting accessories. It is a profile cylinder with an extruded aluminum barrel, meaning it has no external tie rods.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X830S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.