Airtac SE32 Standard Cylinder SE32X860SFA
The AirTAC Airtac SE32 Standard Cylinder SE32X860SFA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 860mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke860 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X860SFA
The AirTAC SE32X860SFA is a double-acting single-rod ISO 15552 profile cylinder engineered for compact, high-speed linear motion. Operating at 0.5 MPa, it generates 402 N of push force and 345 N of pull force, utilizing a 32 mm bore and an 860 mm stroke. This non-standard stroke length is manufactured to order for specialized machinery requiring extended travel.
Unlike traditional tie-rod designs, its square extruded aluminum barrel lacks external tie rods, making it highly corrosion-resistant and easier to mount flush against machine frames. The integrated -S magnet enables precise end-of-stroke detection when paired with AirTAC CMSE reed or DMSE electronic sensors, while field-adjustable air cushioning at both ends allows you to tune deceleration and soften hard end stops dynamically.
Airtac SE32 Standard Cylinder SE32X860SFA Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X860SFA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 860 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X860SFA
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×860 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X860SFA Is Used
Flow Wrapper End-Travel
Drives the extended 860 mm cutting and sealing head travel on continuous flow wrappers, using the 402 N push force to cleanly sever film at high cycle rates.
Pallet Push-Off Station
Actuates a long-stroke product diverter on conveyor lines, where the FA front flange securely mounts the cylinder to the conveyor frame edge.
Lab Sample Transport Arm
Moves sample racks between distant testing stations, relying on the -S magnet and DMSE electronic sensors to confirm arrival at each end of the 860 mm path.
Is the Airtac SE32 Standard Cylinder SE32X860SFA the Right Cylinder?
Stepping up from this 32 mm bore (402 N push at 0.5 MPa), the next size is the 40 mm bore, which provides 628 N of push force for heavier payloads. Conversely, if you need a smaller footprint, the 32 mm is the smallest standard SE bore available. Because the 860 mm stroke far exceeds the 1000 mm maximum standard stroke limit for this bore, it is classified as a non-standard, made-to-order configuration.
With an 860 mm unsupported stroke, the 12 mm rod is susceptible to bending under side loads; an external guide bearing is strongly recommended to prevent premature seal wear. This model includes an FA front flange mounting accessory for rigid front-face attachment and a built-in magnet for position sensing. Remember, a plain SE cylinder does not hold its load when air pressure is lost or exhausted—the piston will drift, so use a BSE rod lock for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X860SFA FAQ
This 32 mm bore cylinder delivers a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, the SE32X860SFA is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface and front flange (FA) footprint as other ISO 15552 profile cylinders, allowing for seamless retrofits.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X860SFA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.