Airtac SE32 Standard Cylinder SE32X90
The AirTAC Airtac SE32 Standard Cylinder SE32X90 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke90 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X90
The AirTAC SE32X90 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers a 402 N push force at 0.5 MPa alongside a 345 N pull force, making it well-suited for light-duty routing and small-format actuation. The square extruded aluminum barrel eliminates external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames to save valuable space.
This 32 mm bore unit travels a 90 mm stroke and relies on a field-adjustable pneumatic cushion at both ends to decelerate the piston near the end of travel, preventing hard mechanical impacts. Because this specific SKU lacks the built-in magnet option, it does not support direct CMSE or DMSE position sensing without modification. The standardized ISO 15552 mounting interface ensures true dimensional interchangeability with comparable profile cylinders.
Airtac SE32 Standard Cylinder SE32X90 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X90 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X90
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X90 Is Used
PCB Depaneling Router
Provides the 402 N push force and 90 mm stroke needed to actuate the tooling gate on a printed circuit board depaneling router.
Lab Sample Dispenser
Drives a 90 mm reagent probe arm in an automated clinical chemistry analyzer, utilizing the smooth profile barrel for flush mounting.
Small Pouch Folder
Actuates a 90 mm tucking flap on a compact vertical form-fill-seal machine for small pouches, relying on adjustable cushioning for soft stops.
Is the Airtac SE32 Standard Cylinder SE32X90 the Right Cylinder?
When sizing this 32 mm bore actuator, note that stepping down to a 25 mm bore significantly reduces your output force, while stepping up to a 40 mm bore yields a 628 N push at 0.5 MPa for heavier payloads. This SE32X90 ships with a PT1/8 port and a 12 mm rod with an M10x1.25 thread. Since this is a standard 90 mm stroke, it falls well within the 1000 mm maximum standard stroke limit for this bore. Remember that a plain double-acting cylinder relies on live air pressure to hold a load; if air is lost, the piston will drift, so consider an external pilot-operated check valve or a BSE rod lock variant for strict position-holding requirements.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X90 FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, and the maximum push force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE32X90 is a true ISO 15552 profile cylinder, meaning its mounting interface and physical dimensions are standardized. It serves as a drop-in dimensional replacement for other ISO 15552 cylinders, utilizing a PT1/8 port and an M10x1.25 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.