Airtac SE32 Standard Cylinder SE32X900
The AirTAC Airtac SE32 Standard Cylinder SE32X900 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke900 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X900
The AirTAC SE32X900 is a double-acting, single-rod ISO 15552 profile cylinder engineered for specialized long-stroke actuation. Delivering 402 N of push force at 0.5 MPa, this 32 mm bore unit utilizes a hard-chrome plated carbon steel rod. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant profile that mounts flush against machine frames while protecting the pneumatic internals.
Because a 900 mm stroke exceeds the standard 1000 mm maximum for this bore, this specific SKU is configured as a non-standard, made-to-order variant. It features field-adjustable pneumatic cushioning at both ends to decelerate the piston smoothly over the long travel distance. Note that this base configuration omits the built-in magnet, meaning it will not support AirTAC CMSE or DMSE position sensors without modification.
Airtac SE32 Standard Cylinder SE32X900 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X900 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X900
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X900 Is Used
Long-stroke Film Web Tracking
Guides and tensions packaging film webs over a 900 mm adjustment range, using the 402 N extend force to manipulate dancer arms without overwhelming delicate material.
Pallet Push-off Station
Actuates a 900 mm push-off arm to transfer light cardboard cartons from a roller conveyor to a downstream labeling zone at 30-800 mm/s.
Sample Extraction Arm
Draws test samples from deep within testing ovens, relying on the tie-rod-free extruded barrel to resist thermal expansion and maintain smooth travel.
Is the Airtac SE32 Standard Cylinder SE32X900 the Right Cylinder?
Stepping down to a 25 mm bore (if available in your region) drops the 0.5 MPa push force to roughly 246 N, while moving up to a 40 mm bore increases it to 628 N, offering a sturdier alternative if the 402 N output proves marginal. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for competing standard profile cylinders, utilizing a PT1/8 port and a 12 mm rod with an M10x1.25 thread. Because the 900 mm stroke creates a long unsupported rod span, an external guide rail is strongly recommended to prevent rod-bearing bending and premature seal wear under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X900 FAQ
This 32 mm bore cylinder delivers 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No. The field-adjustable air cushions at both ends only decelerate the piston near the end of the stroke; they do not act as a locking mechanism. If the application requires position holding without live air pressure, a separate BSE rod lock or an external pilot-operated check valve is necessary.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X900
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.