Airtac SE32 Standard Cylinder SE32X95S
The AirTAC Airtac SE32 Standard Cylinder SE32X95S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke95 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X95S
The AirTAC SE32X95S is a double-acting single-rod profile cylinder operating at 0.15-1.0 MPa, delivering a 402 N push at 0.5 MPa. Built to the ISO 15552 standard, its square extruded aluminum barrel omits external tie rods entirely. This design not only prevents corrosion traps but allows for flush mounting against machine frames, saving valuable space in compact assemblies.
This specific unit includes a built-in magnet (-S) for position sensing and features a 95 mm stroke. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a setscrew, softening hard impacts when cycling at speeds up to 30-800 mm/s. The cushion is strictly for deceleration and does not lock or hold the load if air pressure is lost.
Airtac SE32 Standard Cylinder SE32X95S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X95S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X95S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X95S Is Used
PCB Drill Bit Changer
Provides the precise 402 N extension needed to actuate tool-changing carousels in small CNC routers, with the -S magnet confirming tool release via DMSE sensors.
Blister Pack Sealing Jig
Cycles the 95 mm stroke to lower a heat-sealing head onto blister card stock, using its adjustable end-cushions to prevent crushing the plastic packaging.
Lab Tube Sorter Gate
Pushes sample racks along a diagnostic carousel, where the compact tie-rod-free extruded profile allows tight side-by-side mounting in the machine bay.
Is the Airtac SE32 Standard Cylinder SE32X95S the Right Cylinder?
When sizing this 32 mm bore, step down if you need lower force or step up to the 40 mm bore if you require a 628 N push at 0.5 MPa. Conversely, if your application demands less than the 402 N this bore provides, the next size down offers a smaller footprint. Because this is a non-standard 95 mm stroke, expect a made-to-order lead time. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 profile cylinders, meaning you can reuse existing mounting hardware like LB foot brackets or FA front flanges without redrilling. The PT1/8 port and M10x1.25 rod thread are standard for this bore size.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X95S FAQ
At 0.5 MPa, it provides 402 N of push and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf when operating at the 1.0 MPa pressure limit.
No, the adjustable air cushions at both ends only serve to decelerate the piston near stroke end; they do not act as a brake. If you need to hold a load without live air pressure, you must use a BSE rod lock variant or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.