Airtac SE40 Standard Cylinder SE40BX600
The AirTAC SE40 Standard Cylinder SE40BX600 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke600 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE40 Standard Cylinder SE40BX600
The AirTAC SE40BX600 is a double-acting single-rod ISO 15552 profile cylinder engineered for a 600 mm stroke. It delivers a robust 628 N push force at 0.5 MPa, utilizing a 16 mm rod and an M12x1.25 thread. The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This specific SKU features a SUS304 stainless steel rod (code B) tailored for corrosive or washdown environments. Because it lacks the -S magnet code, it arrives without a built-in position sensor. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling.
Airtac SE40 Standard Cylinder SE40BX600 Technical Specifications
| Model | Airtac SE40 Standard Cylinder SE40BX600 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE40 Standard Cylinder SE40BX600
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE40 Standard Cylinder SE40BX600 Is Used
Bottling Line Diverters
Uses the 628 N extend force and 600 mm stroke to push PET bottle containers between parallel conveyor lanes during format changeovers.
Lab Washdown Ejectors
Leverages the SUS304 stainless rod to safely eject sterilized trays from a washdown chamber without risking surface corrosion.
Carton Flap Folders
Extends 600 mm to fold large corrugated carton flaps, relying on the adjustable pneumatic cushion to prevent slamming at stroke end.
Is the Airtac SE40 Standard Cylinder SE40BX600 the Right Cylinder?
When sizing this 40 mm bore actuator, compare its 628 N push at 0.5 MPa against the 32 mm bore (402 N) if your load requires less force, or step up to the 50 mm bore (982 N) for heavier lifting. This model uses a PT1/4 port and includes the SUS304 stainless rod for washdown duty. If your application requires position feedback, you would need an -S magnet variant for CMSE or DMSE sensors.
At 600 mm of stroke, the 16 mm rod is subject to bending under lateral loads; an external guide rail is strongly recommended to prevent rod-bearing wear. Note that a plain SE cylinder drifts when air pressure is lost or the valve centers—it cannot hold a load without live pressure. For dead-end holding, consider a BSE rod lock variant. Its standardized ISO 15552 mounting interface ensures direct compatibility with existing foot and flange hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE40 Standard Cylinder SE40BX600 FAQ
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The maximum push capacity is 128 kgf at 1.0 MPa, and it operates at speeds between 30-800 mm/s.
Yes, the SE40BX600 is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, retaining your existing mounting accessories. Note this specific SKU uses a PT1/4 port and lacks a position-sensing magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE40 Standard Cylinder SE40BX600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.