Airtac SE40 Standard Cylinder SE40BX700H
The AirTAC SE40 Standard Cylinder SE40BX700H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke700 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE40 Standard Cylinder SE40BX700H
The AirTAC SE40BX700H is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers 628 N of push force at 0.5 MPa and features a 700 mm stroke. Built with a SUS304 stainless steel rod and FKM (Viton) seals, this variant operates reliably in temperatures up to 150 °C, making it ideal for high-heat or washdown applications.
The extruded aluminum barrel eliminates external tie rods, resulting in a compact, corrosion-resistant body that mounts flush on machinery. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration for fast cycling. Note that this specific SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensors without modification.
Airtac SE40 Standard Cylinder SE40BX700H Technical Specifications
| Model | Airtac SE40 Standard Cylinder SE40BX700H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE40 Standard Cylinder SE40BX700H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE40 Standard Cylinder SE40BX700H Is Used
Bakery Oven Door Actuation
Utilizes the 700 mm stroke and FKM Viton seals to push and pull heavy oven doors in commercial bakeries, enduring ambient heat up to 150 C without seal degradation.
CNC Chip Conveyor Gating
Employs the 628 N push force at 0.5 MPa to open and close coolant-wash gates on chip conveyors, leveraging the SUS304 rod for corrosion resistance.
Shrink Wrap Ejector
Cycles at 30-800 mm/s to eject packaged goods from shrink-wrap heat tunnels, using the field-adjustable cushioning to soften end stops at high speeds.
Is the Airtac SE40 Standard Cylinder SE40BX700H the Right Cylinder?
This 40 mm bore cylinder provides 628 N push at 0.5 MPa. If your application requires less force, the adjacent 32 mm bore offers 402 N; if you need more power, the 63 mm bore provides 1559 N. Because the 700 mm stroke exceeds the 300 mm threshold, the unsupported rod length increases the risk of side-load bending on the rod bearing—using an external guide rail is strongly recommended to prevent premature wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other standard profile cylinders. When ordering, confirm you need the PT1/4 port, the high-temperature FKM seal, and the SUS304 rod. Remember that a standard SE cylinder cannot hold a load if air pressure is lost; for position holding, consider the BSE rod lock series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE40 Standard Cylinder SE40BX700H FAQ
The SE40BX700H provides a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force is 879 N, with a maximum push of 128 kgf at 1.0 MPa. Thanks to the FKM (Viton) seals, it operates in temperatures ranging from -20 to +150 C.
Yes, the SE40BX700H is a standard ISO 15552 / VDMA 24562 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders. It features a PT1/4 port and a 16 mm SUS304 stainless steel rod, but note this specific SKU does not include a sensor magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE40 Standard Cylinder SE40BX700H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.