
The AirTAC SE40 Standard Cylinder SE40X100FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X100FTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for 628 N of push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This specific SKU is configured with an FTC mounting accessory and a standard PT1/4 port.
Because this unit lacks the -S magnet option, it does not support AirTAC CMSE or DMSE position sensors out of the box. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X100FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical arms on case erectors to fold minor flaps at 628 N push force, ensuring square cardboard boxes are prepped for adhesive application.
Secures aluminum engine housings during CNC machining, utilizing the 100 mm stroke to accommodate varying part widths while maintaining rigid positioning.
Actuates the dancer bar assembly on vertical form-fill-seal machines, making micro-adjustments to maintain consistent web tension during high-speed packaging runs.
This 40 mm bore generates 628 N push at 0.5 MPa. If your application requires less force, stepping down to the 32 mm bore yields 402 N push; if you need more clamping power, moving up to the 50 mm bore provides 982 N push. As a standard double-acting cylinder, the SE40X100FTC relies on live air pressure to maintain its position and will drift if air is lost or the valve is centered—use a BSE rod lock for fail-safe holding. The FTC mount ensures standardized ISO 15552 attachment points, making it a direct replacement for other ISO 15552 cylinders.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The air supply connects via a PT1/4 port.
No, this specific SKU does not include the -S magnet option, meaning it cannot host AirTAC CMSE reed or DMSE electronic sensors. If position feedback is required, you would need an SE variant with the built-in magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.