
The AirTAC SE40 Standard Cylinder SE40X100S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X100S is a double-acting, single-rod ISO 15552 profile cylinder engineered for precise linear actuation. Operating at 0.5 MPa, it generates 628 N of push force and 528 N of pull force, making it a robust choice for mid-range automation tasks. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 40 mm bore, 100 mm stroke variant includes a built-in magnetic piston (-S) designed to interface directly with AirTAC CMSE reed and DMSE electronic sensors along the three integrated side grooves. Furthermore, the field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune the exhaust bleed via a set screw, softening hard end-stops and reducing kinetic impact during high-speed 30-800 mm/s cycles.
| Model | Airtac SE40 Standard Cylinder SE40X100S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical arms that fold corrugated cardboard flaps on automated packaging lines, utilizing the 628 N push force and 100 mm stroke to cleanly clear the box path before taping.
Actuates routing pop-up gates on parcel sorting conveyors, where the 528 N retract force reliably pulls the deflector plate out of the main product flow after diverting a package.
Locks and unlocks the tool-holder clamps in automated CNC machining centers, using the integrated magnet and DMSE sensors to confirm clamp status before the spindle engages.
Selecting the SE40X100S is ideal when your application requires approximately 628 N of push force at 0.5 MPa. If your payload is lighter, you can step down to the 32 mm bore, which yields 402 N of push. For heavier loads requiring more thrust, stepping up to the 50 mm bore provides 982 N of push. Because this is a double-acting cylinder, it relies on continuous air pressure to move; if air is lost or the valve is centered, the piston will drift and cannot hold a load. For position-holding requirements without live pressure, consider the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard 40 mm bore, 100 mm stroke unit with PT1/4 ports, sharing identical mounting interface dimensions.
Quick checklist
At 0.5 MPa, the SE40X100S provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The maximum push force is 128 kgf at 1.0 MPa. The operational speed range for this 40 mm bore cylinder is 30-800 mm/s.
Yes, the SE40X100S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can use it as a direct replacement for other 40 mm profile cylinders, as the mounting holes, PT1/4 port locations, and rod-end M12x1.25 thread match the standardized footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.