
The AirTAC SE40 Standard Cylinder SE40X100SCB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X100SCB is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 628 N at 0.5 MPa and a maximum of 128 kgf at 1.0 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This specific configuration includes a built-in position magnet for CMSE or DMSE electronic sensors, paired with a CB double clevis mount for pivoting articulation. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X100SCB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical folder arms on a corrugated box sealer, using the 100 mm stroke and 628 N push force to cleanly tuck flaps at high cycling speeds.
Actuates a swinging CB-mounted diverter arm on a sortation conveyor, leveraging the double clevis joint to accommodate the arc of the pivot without binding.
Adjusts the tensioning roller position on a weaving machine, using the built-in magnet and DMSE sensor to confirm yarn slack control across the 100 mm travel.
If your pivot-driven mechanism requires less thrust, stepping down to the 32 mm bore drops the 0.5 MPa push force to 402 N; conversely, scaling up to a 50 mm bore raises it to 982 N. This 40 mm bore provides a balanced middle ground, utilizing a PT1/4 port and a 16 mm rod to handle moderate side loads effectively.
Because this is a double-acting cylinder, it relies on continuous air pressure to hold a load; if air is lost or the valve centers, the piston will drift. For applications requiring strict position holding on a pivot, consider a BSE rod lock variant. As a true ISO 15552 cylinder, it serves as a direct dimensional replacement for any standard profile cylinder on the market.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with an absolute maximum push of 128 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, the SE40X100SCB is dimensionally interchangeable with any standard ISO 15552 profile cylinder. The included CB double clevis mount simplifies retrofitting on pivoting assemblies, and the field-adjustable air cushions can be tuned to match your existing machine's end-stop timing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.