
The AirTAC SE40 Standard Cylinder SE40X110S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 110mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X110S is a double-acting, single-rod ISO 15552 profile cylinder engineered with a 40 mm bore and a 110 mm stroke. Operating at 0.5 MPa, it generates 628 N of push force and 528 N of pull force, making it well-suited for mid-range industrial actuation. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes a built-in magnet (indicated by the -S code) designed to interface seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, effectively softening hard end stops during high-speed operations up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X110S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 628 N push force required to smoothly fold and seal cardboard flaps on high-speed packaging lines, utilizing the 110 mm stroke to clear the product path during retraction.
Actuates routing gates on package conveyors, where the built-in -S magnet triggers DMSE sensors to confirm arm position before downstream traffic arrives.
Pushes lightweight machined aluminum parts out of a CNC lathe chuck, relying on the adjustable end cushions to prevent the delicate 16 mm rod from slamming during 800 mm/s ejection cycles.
When sizing this 40 mm bore actuator, consider stepping down to a 32 mm bore if your load only requires 402 N of push force at 0.5 MPa, or moving up to a 50 mm bore for a substantial increase to 982 N. Because this is a standard double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; the piston will drift. For position-holding requirements, explore the BSE rod-lock variant or an external pilot-operated check valve. As a true ISO 15552 profile cylinder, the SE40X110S serves as a direct replacement sharing standard mounting interface dimensions, a PT1/4 port, and M12x1.25 rod-end threading.
Quick checklist
At 0.5 MPa, the SE40X110S delivers 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf when operated at 1.0 MPa.
Yes, the SE40X110S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware and utilize the standard PT1/4 port and M12x1.25 rod thread without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.