
The AirTAC SE40 Standard Cylinder SE40X115S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 115mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X115S is a double-acting single-rod ISO 15552 profile cylinder, delivering 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 40 mm bore unit includes a built-in magnet (the -S option) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. Field-adjustable pneumatic cushioning at both ends allows precise tuning of end-stop deceleration, protecting payloads during 115 mm strokes.
| Model | Airtac SE40 Standard Cylinder SE40X115S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the exact 628 N push force at 0.5 MPa needed to shear routed printed circuit boards without stressing surrounding components.
Uses the 115 mm stroke to move bearing housings between CNC machining stations, relying on the -S magnet to trigger DMSE electronic sensors for precise positioning.
Executes rapid 115 mm extensions to fold corrugated carton flaps, tuned via the adjustable air cushions to prevent hard impacts at high cycle rates.
If 628 N push is insufficient, stepping up to the 50 mm bore yields 982 N at 0.5 MPa; conversely, dropping to the 32 mm bore provides 402 N for lighter loads. Because this is a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing standard mounting hardware. Note that a plain SE does not hold a load when air is lost—consider an AirTAC BSE rod lock for fail-safe holding. The 115 mm stroke is below the 300 mm threshold, so side-load stress on the M12x1.25 rod thread is minimal.
Quick checklist
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X115S is dimensionally interchangeable per ISO 15552 standards. It shares the standardized mounting interface and PT1/4 porting, allowing a direct replacement for other ISO 15552 profile cylinders without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.