
The AirTAC SE40 Standard Cylinder SE40X128S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 128mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X128S is a double-acting, single-rod ISO 15552 profile cylinder delivering 628 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized mounting interfaces.
Because this specific unit includes the -S magnet code, it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing. The field-adjustable air cushioning at both stroke ends lets technicians dial in end-of-stroke deceleration via a set screw, softening hard mechanical impacts during high-speed 30-800 mm/s actuation.
| Model | Airtac SE40 Standard Cylinder SE40X128S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 128 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×128 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 128 mm stroke to push parcels weighing up to 60 kg onto secondary sorting chutes at 0.5 MPa, relying on the 628 N push force to overcome box friction.
Secures delicate printed circuit boards during automated soldering, utilizing the built-in -S magnet to trigger DMSE electronic sensors for precise start positioning.
Drives mechanical arms to fold corrugated cardboard flaps prior to sealing, with the adjustable end cushions absorbing the kinetic energy of the 30-800 mm/s cycle.
When sizing this 40 mm bore actuator, compare its 628 N push at 0.5 MPa against your true load. If your application requires less force, stepping down to the 32 mm bore yields 402 N of push, whereas upgrading to the 50 mm bore provides 982 N for heavier payloads. The PT1/4 port and M12x1.25 rod thread scale directly with this mid-range capacity.
The 128 mm stroke on this model provides ample travel for standard automation tasks. Remember that a standard SE cylinder relies on live air pressure to maintain its position; if air is lost or the valve centers, the piston will drift and cannot hold a load. For applications needing static holding without continuous air, consider the BSE rod lock variant.
Quick checklist
At 0.5 MPa, it provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The maximum allowable push force is 128 kgf when operated at 1.0 MPa.
Yes, the SE40X128S is dimensionally interchangeable per ISO 15552 standards. You can drop it in to replace other ISO 15552 profile cylinders without altering your existing mounting hardware or centerline dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.