
The AirTAC SE40 Standard Cylinder SE40X135 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 135mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X135 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Featuring a 40 mm bore and a 135 mm stroke, it operates efficiently between 30-800 mm/s. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while leaving the three integrated sensor grooves fully accessible for future upgrades.
This unit relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston near the stroke limits, allowing technicians to dial out harsh end-stop impacts via a simple screw. Note that this specific SKU is configured without a built-in magnet, meaning it will not directly support AirTAC CMSE or DMSE position sensing without modification.
| Model | Airtac SE40 Standard Cylinder SE40X135 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a mid-stroke tool indexing arm on machining centers, utilizing the 628 N push force to positively seat heavy tool holders.
Drives the mechanical flap-folding mechanism on continuous flow packaging lines, where the 135 mm stroke provides the exact travel needed for standard corrugated box widths.
Positions a routing diverter gate on a bottle filling conveyor, relying on the tie-rod-free profile barrel to mount flush within tight transfer zones.
When sizing this 40 mm bore, evaluate your thrust margins: stepping down to a 32 mm bore drops the 0.5 MPa push to 402 N, while moving up to a 50 mm bore raises it to 982 N. As a standard ISO 15552 component, the SE40X135 serves as a direct dimensional replacement for competing profile cylinders, sharing identical mounting interface dimensions and PT1/4 port threads. Because the 135 mm stroke is below the 300 mm threshold, side-load stress on the M12x1.25 rod bearing is moderate, though an external guide is still recommended for heavy lateral loads. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold or lock the load if air pressure is lost.
Quick checklist
The SE40X135 provides 628 N push and 528 N pull at 0.5 MPa, and 879 N push at 0.7 MPa, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, meaning it shares identical mounting footprint and PT1/4 port locations with other ISO 15552 profile cylinders. However, note this specific SKU lacks a sensor magnet, so CMSE or DMSE position switches will not function on it without adding a magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.