
The AirTAC SE40 Standard Cylinder SE40X138S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 138mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X138S is a double-acting single-rod ISO 15552 profile cylinder with a 40 mm bore and a 138 mm stroke. It delivers 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa. Because 138 mm is a non-standard stroke length, this specific unit is manufactured as a made-to-order configuration to suit precise travel requirements.
The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant profile that mounts flush in tight machine envelopes. Equipped with a built-in magnet (-S), it supports AirTAC CMSE reed and DMSE electronic sensors for end-of-stroke detection. The field-adjustable air cushion at both ends lets technicians dial in end-stop deceleration to match the 30 mm cushion length and 30-800 mm/s speed range.
| Model | Airtac SE40 Standard Cylinder SE40X138S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 138 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×138 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical sealing jaw on a continuous flow wrapper, using the 628 N push force to cleanly crimp and cut packaging film at high cyclic rates.
Actuates a routing flap on a conveyor belt system to sort small cartons into packing lanes, relying on the 138 mm stroke to clear the belt path.
Secures aluminum extrusions in a pneumatic clamping vise for CNC machining, using the DMSE sensor signal to confirm part clamping before the spindle starts.
If 628 N push is too much force, step down to the 32 mm bore which yields 402 N at 0.5 MPa. If your fixture needs more thrust, the 50 mm bore provides 982 N at 0.5 MPa. As a true ISO 15552 cylinder, this model is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing PT1/4 port plumbing and mounting brackets during retrofits. Note that a plain SE cylinder does not hold a load if air pressure drops; use a BSE rod lock variant for fail-safe holding. Because the 138 mm stroke is non-standard, confirm delivery timelines during your RFQ.
Quick checklist
At 0.5 MPa, the SE40X138S provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf at 1.0 MPa. It features a 16 mm rod, an M12x1.25 rod thread, and a PT1/4 air port.
Yes. The SE40X138S adheres strictly to the ISO 15552 / VDMA 24562 mounting interface, meaning it is dimensionally interchangeable with other ISO 15552 profile cylinders. You can swap it directly into existing mounting hardware without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.