
The AirTAC SE40 Standard Cylinder SE40X140 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 140mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X140 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against frames while exposing standardized ISO 15552 interface dimensions for seamless retrofitting.
This 40 mm bore unit features a 16 mm hard-chrome plated rod and a PT1/4 port. Because this specific SKU lacks the -S magnet option, it is not equipped for CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both stroke ends allows you to tune end-of-stroke deceleration, protecting payloads from harsh impacts without relying on fixed rubber bumpers.
| Model | Airtac SE40 Standard Cylinder SE40X140 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 628 N of push at 0.5 MPa to reliably fold corrugated carton flaps on high-speed packaging lines, utilizing the 140 mm stroke for compact machine integration.
Actuates a pneumatic diverter arm along conveyor belts to sort medium-weight parcels, benefiting from the adjustable end cushions to prevent harsh stops during rapid cycling.
Ejects processed sample trays from diagnostic analyzers, where the tie-rod-free extruded barrel prevents particle buildup and allows for easy flush mounting to the machine frame.
Stepping down to the 32 mm bore reduces the 0.5 MPa push output to 402 N, while moving up to the 50 mm bore increases it to 982 N, giving you clear sizing boundaries for varying load requirements. If your application must hold a load vertically or resist drift when air pressure is lost, note that this standard SE cylinder will drift; an AirTAC BSE rod lock variant or external pilot-operated check valve is required for true position holding. For ISO 15552 interchangeability, match the 40 mm bore, 140 mm stroke, PT1/4 port, and your required mounting accessory.
Quick checklist
The SE40X140 delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force is 879 N, and the maximum push force is 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X140 is built to the ISO 15552 / VDMA 24562 standard, meaning its mounting footprint and body dimensions are fully interchangeable with other ISO 15552 profile cylinders. It features a PT1/4 port and a 16 mm rod, but please note this specific SKU lacks a sensor magnet for CMSE/DMSE switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.