
The AirTAC SE40 Standard Cylinder SE40X145 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 145mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X145 is a double-acting, single-rod ISO 15552 profile cylinder engineered for standard industrial automation tasks. Operating at 0.5 MPa, it generates 628 N of push force and 528 N of pull force, peaking at a maximum push capacity of 128 kgf at 1.0 MPa. The 40 mm bore pairs with a PT1/4 port and a 16 mm hard-chrome plated rod to deliver reliable linear motion across its 145 mm stroke.
This unit features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant profile that mounts flush in tight machine envelopes. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, preventing hard mechanical impacts when cycling at speeds up to 800 mm/s. This specific SKU omits the magnet option, meaning it does not support AirTAC CMSE or DMSE position sensors without factory modification.
| Model | Airtac SE40 Standard Cylinder SE40X145 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives mechanical folding arms on case erecting lines, using the 145 mm stroke to tuck flaps precisely before tape sealing, leveraging the 628 N push force to overcome cardboard resistance.
Actuates routing flaps on conveyor systems to direct heavy pallets into secondary packaging lanes, relying on the hard-chrome 16 mm rod to endure repetitive lateral friction.
Positions portable spot welding guns along automotive subassembly lines, utilizing the adjustable pneumatic cushions to soften the 800 mm/s high-speed end stops and protect weld tip alignment.
Selecting the SE40X145 is ideal when your application requires approximately 628 N of push force at 0.5 MPa. If your load demands less energy, stepping down to the 32 mm bore yields 402 N of push, saving air volume. Conversely, scaling up to the 50 mm bore provides 982 N of push for heavier payloads. Because this is a double-acting cylinder, it relies on continuous air pressure to move; it will drift if air is lost or the valve is centered, so a BSE rod lock is required for fail-safe load holding.
As a dimensionally interchangeable ISO 15552 cylinder, the SE40X145 serves as a direct replacement for other ISO 15552 cylinders, matching standard mounting hardware and bore/stroke interfaces. It utilizes a PT1/4 port and a 16 mm rod with an M12x1.25 thread. With a 145 mm stroke, side-load stress on the rod bearing is minimal, though external guides should still govern any heavy lateral loads to maximize seal longevity.
Quick checklist
The SE40X145 delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force is 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE40X145 is built to the ISO 15552 / VDMA 24562 standard, making it dimensionally interchangeable with other ISO 15552 profile cylinders. You can drop it into existing mounting hardware without frame modifications. Note that this specific SKU lacks a piston magnet, so it cannot be used with AirTAC CMSE or DMSE sensors unless retrofitted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.