
The AirTAC SE40 Standard Cylinder SE40X145S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 145mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X145S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force and 528 N of pull force at 0.5 MPa. Operating at speeds of 30-800 mm/s, it utilizes a PT1/4 port and a 16 mm hard-chrome plated rod. Because it follows the standardized VDMA 24562 dimensions, it serves as a direct, direct replacement for any ISO 15552 cylinder without altering your existing mounting footprint.
This 40 mm bore unit features a square extruded aluminum barrel that eliminates external tie rods, keeping the body compact and highly resistant to corrosion while allowing flush mounting on machinery. The -S suffix indicates a built-in piston magnet, enabling seamless position detection with AirTAC CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable air cushions at both stroke ends allow you to precisely tune end-of-stroke deceleration, preventing hard impacts during high-speed cycling.
| Model | Airtac SE40 Standard Cylinder SE40X145S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 628 N of precise clamping thrust at 0.5 MPa to secure aluminum workpieces inside CNC machining centers, utilizing the -S magnet for closed-loop tool confirmation.
Drives folding arms on continuous packaging lines at up to 800 mm/s, using its adjustable end cushions to absorb kinetic energy and prevent mechanical bounce.
Actuates routing gates on beverage conveyors, where the tie-rod-free extruded profile resists washdown moisture and offers a compact footprint for tight machine clearances.
When sizing this actuator, consider stepping down to the 32 mm bore (402 N push at 0.5 MPa) for lighter, faster tasks, or stepping up to the 50 mm bore (982 N push at 0.5 MPa) if your payload demands greater thrust. The SE40X145S includes a PT1/4 port, a 145 mm stroke, and the built-in -S magnet for CMSE / DMSE sensors. To retrofit an existing machine, simply pair it with standard ISO 15552 mounting hardware like an FA front flange or LB foot bracket. Since the 145 mm stroke is below the 300 mm threshold, side-load stress on the 16 mm rod bearing is minimal, though an external guide remains beneficial for heavy radial loads. Remember that a standard SE cylinder relies on live air pressure to move; it does not hold its position if air is lost, so add a BSE rod lock for fail-safe load holding.
Quick checklist
At 0.5 MPa, the SE40X145S generates 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The maximum allowable push force is 128 kgf when operating at the maximum pressure of 1.0 MPa.
Yes, the SE40X145S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact same mounting interface and footprint as other ISO 15552 profile cylinders, making it a direct retrofit. Additionally, the -S magnet allows you to mount AirTAC CMSE or DMSE sensors directly into the extruded barrel's sensor grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.