
The AirTAC SE40 Standard Cylinder SE40X15 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 15mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X15 is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact actuation. It delivers a push force of 628 N at 0.5 MPa and a pull force of 528 N, utilizing a 16 mm hard-chrome plated rod. Designed with an extruded aluminum barrel, it eliminates external tie rods to provide a clean, corrosion-resistant exterior that mounts flush in tight assemblies.
This specific SKU lacks a built-in magnet, meaning it operates without electronic or reed position sensing out of the box. Field-adjustable pneumatic cushioning at both stroke ends allows mechanics to fine-tune deceleration, ensuring smooth stops even at operating speeds up to 800 mm/s. The standardized ISO 15552 footprint ensures direct dimensional interchangeability with comparable profile cylinders.
| Model | Airtac SE40 Standard Cylinder SE40X15 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 628 N of push at 0.5 MPa to rapidly secure printed circuit board panels against a machining bed before drilling operations begin.
Uses the short 15 mm stroke to rapidly pivot a sorting flap, redirecting lightweight cartons on a high-speed distribution conveyor line.
Powers the precise opening and closing of a pneumatic filling valve on a liquid bottling machine, benefiting from the flush tie-rod-free profile.
When sizing this 40 mm bore actuator, evaluate your force margin carefully: the neighboring 32 mm bore provides 402 N of push at 0.5 MPa, while stepping up to a 50 mm bore yields 982 N. This SE40X15 generates 628 N push at 0.5 MPa (879 N at 0.7 MPa, max 128 kgf at 1.0 MPa) and uses a PT1/4 port. Keep in mind that a standard double-acting cylinder relies on continuous air pressure to move; if air is lost or the valve is centered, the piston will drift and cannot hold a load without an external pilot-operated check valve or a BSE rod lock variant.
Quick checklist
The SE40X15 generates 628 N of push force and 528 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. It features a PT1/4 port and a 16 mm rod.
Yes, its standardized ISO 15552 mounting dimensions make it a direct replacement for comparable profile cylinders. This specific SKU does not include a built-in magnet (-S), so it cannot support CMSE or DMSE position sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.