
The AirTAC SE40 Standard Cylinder SE40X150SCA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X150SCA is a double-acting, single-rod ISO 15552 profile cylinder engineered for pneumatic actuation. With a 40mm bore, it generates 628 N of push force and 528 N of pull force at 0.5 MPa. The extruded aluminum square barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes a CA single clevis mounting accessory for pivoting applications and a built-in magnet (-S) for position sensing. The integrated magnetic ring interfaces directly with AirTAC CMSE reed and DMSE electronic switches fitted into the sensor grooves on three sides of the body. Furthermore, the end caps feature field-adjustable air cushioning, allowing technicians to tune end-of-stroke deceleration via a screw rather than relying on a fixed rubber bumper.
| Model | Airtac SE40 Standard Cylinder SE40X150SCA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a pivoting flap mechanism on a vertical case packer, utilizing the 150mm stroke and CA clevis to fold cardboard end flaps at a 628 N push force.
Actuates a swinging diverter gate on a parcel sorting conveyor belt, where the CA clevis accommodates the angular motion and the DMSE sensor confirms gate position.
Pushes metal blanks into a stamping press feed line, relying on the adjustable pneumatic cushion to soften the 150mm stroke end-stop and protect the tooling.
If your pivot mechanism requires slightly less force, stepping down to the 32mm bore yields 402 N of push at 0.5 MPa. Conversely, scaling up to the 50mm bore provides 982 N of push at 0.5 MPa for heavier articulating loads. Since this is a standard double-acting cylinder, it will not hold a load if air pressure drops or the valve is centered; the piston will drift. For applications needing secure position holding without live pressure, consider the BSE rod lock variant. To replace an existing unit, match the 40mm bore, 150mm stroke, PT1/4 port, CA clevis mount, and the -S magnet requirement.
Quick checklist
At 0.5 MPa, the SE40X150SCA provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N. The maximum operating pressure is 1.0 MPa, which yields a maximum push force of 128 kgf.
Yes, the SE40X150SCA is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders by matching the 40mm bore, 150mm stroke, PT1/4 port, and CA clevis mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.