
The AirTAC SE40 Standard Cylinder SE40X150SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X150SFTC is a double-acting single-rod ISO 15552 profile cylinder engineered for mid-range actuation, delivering a robust 628 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing fewer crevices to debris.
This 40mm bore unit ships with a built-in position magnet for CMSE reed and DMSE electronic sensors, alongside field-adjustable air cushioning at both ends to soften end-of-stroke impacts. The integrated FTC centre trunnion mounting provides pivotal support for dynamic articulation, operating reliably at speeds of 30-800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X150SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a pivoting routing gate on a packaging conveyor, using the 628 N thrust at 0.5 MPa to snap cardboard cartons into secondary lanes without stalling the belt.
Shifts the sliding safety enclosure on a horizontal CNC lathe, relying on the FTC trunnion to accommodate slight angular shifts while the 150mm stroke clears the work area.
Extends to grip and stretch film rolls on an automated pallet wrapper, utilizing the DMSE electronic sensor feedback to confirm material engagement before rotation begins.
Selecting this 40mm bore yields 628 N of push force at 0.5 MPa. If your payload is lighter, stepping down to the 32mm bore reduces thrust to 402 N, whereas moving up to the 50mm bore increases it to 982 N for heavier fixtures. The FTC trunnion accessory is ideal for mechanisms requiring angular rotation along the stroke axis, though an external guide remains necessary to absorb lateral torsion.
As a standard double-acting cylinder, this model will drift if air pressure is lost or the valve centers, meaning it cannot hold a vertical load safely without live pressure. For suspended loads requiring fail-safe locking, consider the BSE rod-lock variant. Because the 150mm stroke is under 300mm, rod-bearing bending stress is minimal, but always verify the PT1/4 port and M12x1.25 rod thread align with your existing plumbing and clevises.
Quick checklist
At 0.5 MPa, this 40mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with an absolute maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X150SFTC is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing mounting footprints and use the same FTC trunnion hardware, provided your setup accommodates the PT1/4 port and M12x1.25 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.