
The AirTAC SE40 Standard Cylinder SE40X155 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X155 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal pneumatics.
This specific SKU lacks a built-in magnet, meaning it ships without position sensing out of the box. Field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops during 155 mm travel cycles.
| Model | Airtac SE40 Standard Cylinder SE40X155 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates routing flaps on packaging conveyors where 628 N push force easily redirects cartons over a 155 mm stroke.
Drives horizontal tool-ejection mechanisms in CNC machining centers, relying on adjustable cushions to protect precision spindles at end stops.
Positions multi-tier laboratory sample racks with smooth 155 mm travel, utilizing the tie-rod-free extruded profile for clean, washdown-friendly mounting.
At 0.5 MPa, this 40 mm bore generates 628 N of push force. If your payload requires less force, stepping down to the 32 mm bore yields 402 N. For heavier dynamics, the 50 mm bore provides 982 N. Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops or the valve centers; applications requiring true mid-stroke locking should evaluate the BSE rod-lock variant. With a 155 mm stroke, the 16 mm rod and its bearing face moderate side-loading; an external guide rail is recommended for heavy offset loads.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders. It uses a PT1/4 port, M12x1.25 rod-end thread, and shares standardized mounting hardware (like FA flanges or LB foot brackets) across the ISO footprint.
Quick checklist
The SE40X155 provides 628 N of push force and 528 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 879 N, and the maximum push force is 128 kgf at 1.0 MPa.
This specific SKU lacks the -S magnet, so it cannot host CMSE or DMSE position sensors without modification. Additionally, the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold the load if air is lost. For position holding, consider the BSE series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.