
The AirTAC SE40 Standard Cylinder SE40X160SFA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 160mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X160SFA is a double-acting single-rod profile cylinder delivering 628 N of push force at 0.5 MPa. Built to the ISO 15552 standard, its extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The FA front flange provides a robust frontal mounting interface for straightforward integration.
This 40 mm bore unit includes a built-in magnet for CMSE or DMSE position sensing and features field-adjustable air cushioning at both ends. The cushion screws allow technicians to tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X160SFA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 628 N of clamping force to secure aluminum housings during CNC machining, using the FA flange to bolt directly to the fixture sub-plate.
Drives a 160 mm stroke arm to fold corrugated carton flaps at high speed, relying on the adjustable air cushion to prevent jarring stops at cycle end.
Actuates a routing gate on a parcel conveyor, using the built-in magnet and DMSE electronic sensor to confirm gate position for the PLC.
This 40 mm bore generates 628 N push at 0.5 MPa. If your application requires less force, stepping down to the 32 mm bore yields 402 N push; if you need more clamping power, the 50 mm bore provides 982 N push. Because this model uses a front flange (FA) and a PT1/4 port, ensure your manifold and mounting face match these ISO 15552 dimensions for a direct retrofit.
At 160 mm of stroke, the 16 mm rod and M12x1.25 thread handle moderate side loads, but an external guide rail is recommended if the load is heavy or off-center. Remember that a standard double-acting cylinder drifts when air pressure is lost; if the machine requires fail-safe load holding, pair this unit with an external rod lock or explore the BSE variant.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The maximum push force is 128 kgf when operating at the 1.0 MPa pressure limit.
Yes, the SE40X160SFA is dimensionally interchangeable with other ISO 15552 profile cylinders. You can drop it into existing FA front-flange mounts using the standard PT1/4 port and M12x1.25 rod thread without modifying the machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.